Superjedi's FPH2 for Soulscythe86

Obviously these are recycled photos. They’re the same ones from 2010, 2012, 2013, etc...

They’re all the same!!! Wake up, sheeple!!

Kidding. Looks incredible, as always. Champion work all around.
 
Got some color on the ears.

20190904_155432.jpg 20190904_155415.jpg
 
Visor time!
I cut visors for my commissions from polypropylene welding shields. These are a dark smoke gray color, and they're lighter and more flexible than formed acrylic. Here's a shield as I receive it.

20190915_105828.jpg

I have some visor templates that I've made to fit the various types of helmets. To cut the visor, I lay the template onto the welding shield.

20190915_105916.jpg

I mark around the template with a silver Sharpie.

20190915_110209.jpg

A few minutes with some tin snips gets me a nice custom fitted visor.

20190915_110827.jpg

I'll mount the visor later today, and this helmet will be finished! (y) :)
 
And here it is... ESB helmet number 37!

20190916_193927.jpg 20190916_193739.jpg

This was a lot of fun to work on. It's really satisfying to get things to this point.

20190916_194035.jpg 20190916_194343.jpg

As always, I'm a little sad that I have to pack it up and send it out, but I know it's going to a good home! ;)

20190916_193840.jpg 20190916_194129.jpg

Thanks for following along again, and I should be starting a new one in a few weeks.
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top