GREEBLIE ATTATCHMENT

[FettDad]

hey guys, another question...did a search and couldnt find my answer, so i will turn to you...i have finished my stock for the blaster, and need to attatch the greeblies...how is everyone doing that? screws, epoxy, superglue? i thought about screws, but i was afraid that would mess up the detail of the greeblies...help? thanks...

 

[Sixxgunn13]

I used a super glue... holding on great so far.

 

[slave1pilot]

CA Glue

 

[Jangos kid]

I just hot glued mine & they have stayed on for 2 years. I wanted to be able to remove them if I had to because I still have to do decent job of woodgraining the stock.
D

 

[GCNgamer128]

The Amazing GOOP.

 

[stormtrooperguy]

The Amazing GOOP.

ditto that.

 

[suspect86]

I screwed TINY holes through the greebs and the stock(which is made of wood) and then put 4 "finishing nails" through each piece. 1 in each corner.
Simply apply a dab of paint over each nail and you'll never see them!

 

[Art Andrews]

If you look in the center of the stock, you can see where the V8 pieces were originally glued, then pried off and reglued further forward. Couldn't say what type of glue was used, but you can still see it on the stock.