Superjedi's SE for Budafett

Ok, we're getting serious now! I masked everything off and airbrushed the red. I love covering up that boring gray primer. :D

20200515_153421.jpg 20200515_153508.jpg

Damage on the red areas will begin this weekend.
 
I love watching the red band and the mandibles come together! In your paint up thread on my ESB FPH2 it was my favorite part!
 
And now it's even more seriouser. :p

I worked on the left half of the brow.

20200520_151040.jpg

Before moving on to the right side of the brow, I went back and did a couple of the effects.
First, here are the white thumbprints.

20200520_174606.jpg

Next, I applied some putty to add dimensional detail to the crack repair. Here it is after paint.

20200520_174545.jpg

The ESB helmet is such a mess!
 
Thanks very much!

We continue to close in on the final look. Here's the upper section of the right mandible. It's one of the most detailed areas on the whole helmet. I need to rest my eyeballs now. :D

The collage pic shows how I build the detail using the topical method.

20200525_155603.jpg 20200525_155742.jpg
 
This thread is more than 3 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top