Shae Vizla Mynock's SWTOR Shae Vizla ("Hunter's Exalted") Armour Build WIP
- Thread starter Mynock
- Start date
Dent Eastwood
Hunter
Depending on price, I am SERIOUSLY interested!!!
As you wish
As you wish
Last edited by a moderator:
Mynock
New Hunter
Here is some info on the helmet that I posted in a run on the RPF.
"The helmet will come as a raw, untrimmed cast, with the ear antenna and mics cast separately. The outer layer of the helmet, antenna wing, and mics will be cold cast in aluminum (just sand, and buff with steel wool for a real metal look!). The ear stalk itself will be an actual 3D printed part, done in ABS plastic for strength. The helmet mold is one piece, so very minimal cleanup/touchup will be needed. Since this helmet appears in a variety of colour schemes in game, I'm assuming each person will want to do their own thing with it. So, the visor will not be included. (If you want a very simple, cost effective visor solution, you can get a green welder's face shield from ebay for $5).
Opening at the base of the helmet is 18cm from side to side and, and 23 cm from front to back. I have a large skull, and it fits me quite well.
Each helmet cast will be $200 Canadian, plus shipping from Canada ($22 to Canada, $36 to US). I will not collect money until each helmet is cast and ready to ship. The interest list is just that, interest, and you will not be locked it. One your helmet is cast, I will contact you via PM. If you are unable to pay, the helmet will be offered to the next person on the list. Payment would be via PayPal."
Those interested in getting on the list for the helmet, please send me an email to taras@mynocksden.com or through the contact section on my website mynocksden.com. It's a lot easier for me to keep track of people that way, as I am active on several forums.
"The helmet will come as a raw, untrimmed cast, with the ear antenna and mics cast separately. The outer layer of the helmet, antenna wing, and mics will be cold cast in aluminum (just sand, and buff with steel wool for a real metal look!). The ear stalk itself will be an actual 3D printed part, done in ABS plastic for strength. The helmet mold is one piece, so very minimal cleanup/touchup will be needed. Since this helmet appears in a variety of colour schemes in game, I'm assuming each person will want to do their own thing with it. So, the visor will not be included. (If you want a very simple, cost effective visor solution, you can get a green welder's face shield from ebay for $5).
Opening at the base of the helmet is 18cm from side to side and, and 23 cm from front to back. I have a large skull, and it fits me quite well.
Each helmet cast will be $200 Canadian, plus shipping from Canada ($22 to Canada, $36 to US). I will not collect money until each helmet is cast and ready to ship. The interest list is just that, interest, and you will not be locked it. One your helmet is cast, I will contact you via PM. If you are unable to pay, the helmet will be offered to the next person on the list. Payment would be via PayPal."
Those interested in getting on the list for the helmet, please send me an email to taras@mynocksden.com or through the contact section on my website mynocksden.com. It's a lot easier for me to keep track of people that way, as I am active on several forums.
Last edited by a moderator:
Fett 4 Real
Sr Hunter
So awesome...wish I had spare cash
Last edited by a moderator:
joshvanrad
Active Hunter
Really looking forward to the armor build!
Those lights really take it to the next level. Nice job man.
Those lights really take it to the next level. Nice job man.
Last edited by a moderator:
T
toolguy301
Guest
Received helmet yesterday & just have to say it is an awesome piece. Very well made. My wife is excited for me to start work on her Shae Vizla costume. This is a great start.
Last edited by a moderator:
Mynock
New Hunter
Last edited by a moderator:
Mynock
New Hunter
For the LEDs/fan I wired up a circuit from scratch using parts I had lying around from other projects (i have A TON of parts!); you can check out the photos towards the bottom of my production diary page here for what I did:
SWTOR Hunter?s ?Exalted" Mandalorian Helmet | MYNOCK'S DEN
This helmet doesn't have any mics or amps that I usually put into my lids, though I will most likely do that on the next helmet I cast. You can check out the amplification system i designed for my stormtrooper helmets on this page:
Stormtrooper Helmet Upgrades | MYNOCK'S DEN
Last edited by a moderator:
Mynock
New Hunter
Just finished a stand for my helmet as well. Process documented here:
Mandalorian Helmet Stand | MYNOCK'S DEN
Mandalorian Helmet Stand | MYNOCK'S DEN
Last edited by a moderator:
NoGoodToM3D3ad
Hunter
Yesssssssssssssssssssssss This is great work...
Last edited by a moderator:
Fett 4 Real
Sr Hunter
Hey looks like my helmet for my BH
Last edited by a moderator:
Fett 4 Real
Sr Hunter
Yep...been playing since beta...Was stoked when they made this stuff legacy gear through the Bounty event
Sent from my SCH-I545
Sent from my SCH-I545
Last edited by a moderator:
TheCafeRacer
New Hunter
Awesome! I named my kitten Shae for this exact reason!
Last edited by a moderator:
Syper
Active Hunter
I got to level 50 when that was the level cap, but I still felt like I couldn’t kill **** on my own. Achieving the highest level for me was a bit of a letdown. I did have lots of fun playing that game though.
Last edited by a moderator:
Fett 4 Real
Sr Hunter
I guess that depends alot of gear, and what you are fighting...I kill plenty on my own as a powertech and vanguard....in PVP
Last edited by a moderator:
