RedBirdXlll
New Hunter
Thank you for the link!!
DVH (7CS) Jetpack scratch build (2015 updates!)
- Thread starter Darth Voorhees
- Start date
no problem! Have fun! 
Thank you sir! The metal parts are made by Dark-side here on the boards. He sells them as upgrades for the resin pieces most packs come with. These packs will come with resin ones i will scratch build but im making the parts to fit Dark-sides metal upgrades so no altering is necessary 
Anywho..update!
Started on the lower rocket. This is a plastic cup, some styrene sheet, a 1.5" PVC pipe and bondo.
I may trim about 1/2" off the top, not sure yet, it seems like it MAY be a little tall. But anywhys, here it is so far, obviously not done
Anywho..update!
Started on the lower rocket. This is a plastic cup, some styrene sheet, a 1.5" PVC pipe and bondo.
I may trim about 1/2" off the top, not sure yet, it seems like it MAY be a little tall. But anywhys, here it is so far, obviously not done
Attachments
Last edited by a moderator:
Matty Matt
Active Hunter
Looks great Lou. I agree about the orange line.
Trying to get the gauntlets into the final stages to have them available soon, but i didnt forget about the jetpack..because well, i need a jetpack for myself! LOL! Within the next couple of weeks i will be making a dump mold of this lower rocket piece and casting one so i can fine tune it and get it ready to fit on the pack. I dont want to trim off the top and lose the structure of the part, so its better i canst one and trim the top on that, and also fine tune the details all at once on a solid piece. In the meantime i will also be doing the dump mold on the main body, as i cant do much more with it at this point because its made of foamboard/styrene. But hang in there folks still workin on this! ...while finishing 4 helmet paint-ups and starting 3 more! ...imma busy! lol
BobasDent1138
Active Hunter
Dude! This thread is amazing! Totally reinspired me all over again to do a build! I've got 3 months to make a DVH quality jp it seems! Do you have a link or size info on the ice molds? Also, as for the spackle, is it vinyl spackle? That's what I use like Matty did with glue over it. I'm staying tuned for the rest of the thrusters too! ;P
-Gav
Do you have a link or size info on the ice molds? Also, as for the spackle, is it vinyl spackle? That's what I use like Matty did with glue over it. I'm staying tuned for the rest of the thrusters too! ;P-Gav
TheZeroEffect
Active Hunter
Excellent
Ok i did a tiny bit of work on this today... i made a mold of the top cap a couple of days ago ...
....and i pulled my master out of it and cast a resin version..here it is next to the original before i cleaned it up..
Here it is cleaned up
Going to need to do this same process for the lower rocket also.....as well as the upper rocket and the thruster cones
....and i pulled my master out of it and cast a resin version..here it is next to the original before i cleaned it up..
Here it is cleaned up
Going to need to do this same process for the lower rocket also.....as well as the upper rocket and the thruster cones
Attachments
Last edited by a moderator:
BobasDent1138
Active Hunter
Beautiful job Lou!! Looks perfect
Sent from my SAMSUNG-SGH-I337
Sent from my SAMSUNG-SGH-I337
Been working on the upper rocket and the thrusters..didnt snap any pics ...but i swear im workin on it! Went to a con this weekend and half my fellow troopers wanted to know where my Fett was...so im in full steam ahead gear to finish this so i can get my Fett back together and troopable!
Last edited by a moderator:
So i seem to have lost my camera either in the shop or somewhere in this office space...ugh. its gotta be here somewhere! So no pics right now...but i have the main body of the jetpack in rubber now. This will end up a dump mold because i need to make a couple of bigger adjustments to the pack that if i tried it with the foamboard/styrene pack i likely would have destroyed it. SO, im going to slush cast 1 pack in 65D urethane resin, and fix/clean up as much as i can on it. So hopefully in the next few weeks i'll be able to mold it again and get a good clean fiberglass castings from a nice production mold off a super clean master Thats the plan anyways.
Still working on the upper rocket from sheet styrene and thrusters as well. I molded the ball part of the thruster so i will be able to cast 2, and found a plastic champagne glass i used for the cone part. Just took a crap mold off it and cast 2 soild cones that i will cut down and partially hollow out for the cone part of the thrusters.
i also made 4 teeth/piano keys and molded them as well. Im going to glue them on a strip of styrene that will fit onto the pack, similar to MOW's newer packs.
i have a real mitchel stabilizer i will mold for the resin one to be included in the kit. I also have the bottom greeblies i will also mold to include resin versions in the kit. It will or course come with a solid resin beacon as well.
Im having a local buddy of mine 3d model the toothed ring for the top of the pack where the rocket goes because the templates dont have the right amount of slots. I will have that printed and use that as the master
So this is moving along steadily at this point. Once everything is done, i will cast one pack and assemble it and make sure all is hunky-dory. If it is, it will become my personal Jetpack. Then i will do a small introductory run of 4 or 5. After that im going to TRY and have a couple in stock, or just do no money down small runs, rather than a rotational system of first in first out. These are a pain to cast, so i feel its best to do small runs randomly for me as i wont have the time to just pump them out as i do make other stuff for other costumes as well.
Thats the plan anyways. Still working on the upper rocket from sheet styrene and thrusters as well. I molded the ball part of the thruster so i will be able to cast 2, and found a plastic champagne glass i used for the cone part. Just took a crap mold off it and cast 2 soild cones that i will cut down and partially hollow out for the cone part of the thrusters.
i also made 4 teeth/piano keys and molded them as well. Im going to glue them on a strip of styrene that will fit onto the pack, similar to MOW's newer packs.
i have a real mitchel stabilizer i will mold for the resin one to be included in the kit. I also have the bottom greeblies i will also mold to include resin versions in the kit. It will or course come with a solid resin beacon as well.
Im having a local buddy of mine 3d model the toothed ring for the top of the pack where the rocket goes because the templates dont have the right amount of slots. I will have that printed and use that as the master
So this is moving along steadily at this point. Once everything is done, i will cast one pack and assemble it and make sure all is hunky-dory. If it is, it will become my personal Jetpack. Then i will do a small introductory run of 4 or 5. After that im going to TRY and have a couple in stock, or just do no money down small runs, rather than a rotational system of first in first out. These are a pain to cast, so i feel its best to do small runs randomly for me as i wont have the time to just pump them out as i do make other stuff for other costumes as well.
Last edited by a moderator:
Found the camera! See, i just needed to post here that i lost it ,and the good vibes i get from TDH, helped me find the camera lol. I'll have pics up of the JP in rubber soon!
BobasDent1138
Active Hunter
Awesome update dude! How much do you think one of those kits will run?
Sent from my SAMSUNG-SGH-I337
Sent from my SAMSUNG-SGH-I337
Not sure yet but im trying to stay within the average price ranges for them at about $300-$375ish. Gotta see what it will cost me to make and how much of a pain it is to cast lol.
TheZeroEffect
Active Hunter
Yay camera found, I'm looking forward to some more shots...
I hate miss-placing items in my work shop, especially when i have a running inventory in my head, (I know bad place, but it works well... until I miss-place something
)
I hate miss-placing items in my work shop, especially when i have a running inventory in my head, (I know bad place, but it works well... until I miss-place something
)
haha!
Ok here is the main body in 3 layers of rubber. 2 brushed on at the normal consistency of Rebound 25, and 1 with a thickener added to avoid too much run off and keep it where it needs to be. I added one more with the thickener and made it as smooth as i could and then added one more without the thickener. I will be flipping it over and doing the back in the next couple of days. This should be sufficient to get at least 1 cast out of it. If im lucky i can get 2 and make one into a custom design.
Ok here is the main body in 3 layers of rubber. 2 brushed on at the normal consistency of Rebound 25, and 1 with a thickener added to avoid too much run off and keep it where it needs to be. I added one more with the thickener and made it as smooth as i could and then added one more without the thickener. I will be flipping it over and doing the back in the next couple of days. This should be sufficient to get at least 1 cast out of it. If im lucky i can get 2 and make one into a custom design.
