WIP - My Fett Supertrooper (a community project)

I'm 95% done with my Supertrooper Dentless Helmet and I just snagged myself a 1977 SuperTrooper Towel Cape. You have a clean outfit and I hope to be at this point in a year or so. Nice job.
 
Ask and you shall receive.
Disclaimer: This helmet was pretty rough when I started with it (my old trooping helmet). The existing prep work on it was not very good (done by someone else years ago) and the dome itself had several flat spots issues going on but instead of getting another helmet I really wanted to keep this one (partly for sentimental value) and to turn it into a sort of personal project for myself as well as a bit of a challenge to see how I could make it look. I sanded the cr@p out of this helmet (took off the old paint job of course but no pics of that part). Before hitting it with the first coat of primer, I covered all the sanding grooves with Bondo brand filler, then did two coats (sanding in between) with a final wet sand before sending it off to the body shop. Also filled in the dent (what a pain that was). It's only in primer at the moment, but here's some progress shots -
WP_20140423_001_zps519f732f.gif

WP_20140423_002_zps3861b7b6.gif

WP_20140424_011_zps398931ab.gif

The key slots were horrible, so they had to be redone. I used RF's templates then measured and traced onto a thin sheet of .010 styrene and cut and covered the old ones and blended the edges in with Tamiya's white putty (awesome sauce by the way)
Keyslotcomp_zpsc1b556ef.gif

WP_20140424_007_zpsbcf88571.gif

WP_20140424_010_zps11a1e4ff.gif

WP_20140424_009_zps8993639f.gif

WP_20140424_013_zps679597cd.gif

WP_20140424_016_zps39c9d258.gif

WP_20140424_014_zps69ed5702.gif

WP_20140424_012_zpscd4a185b.gif


The ears that came with this were garbage (and horrendously attached) so I cracked them off and chucked 'em into the trash. Got some nice CC ones from Animefan. I hit them with Rub-n-Buff
WP_20140503_001_zps70bfa9e4.gif

WP_20140503_002_zps4e9a744c.gif

Now just waiting on the body shop to finish it up for me. Friend of a buddy who's supposed to be a bad mofo when it comes to painting, so we'll see...fingers' crossed!

Anybody got an ID on this bucket? Would really like to know what it is, if anyone can figure it out. Thanks!
 
I need to come over to see him since I was lame and missed him at ACE. I'm pumped to see if I need to redo all my armor in auto paint!
 
Wow, this looks great redkraytdragon ! And the list of where you've sourced the part is very helpful as well as I'm really swaying towards doing the Supertrooper as my first costume and hope to get it 501st approved (checking to see if this is one of the concepts that are approved as the CRL for those are not filled in at the moment).

I've reached out to SkyGunBro (thru his FB page) to check in on the Helmet first, (love both the super trooper & McQuarrie concept one he has) not sure if he's still doing them though. Fingers crossed!
 
Your new armor looks great,
Really nice work , you should be very happy with this build,
This is a little out of context but, do you have any comparison shots of your v1/2 next to your v3 stuff I'd be cool to see them lined up in the same shot,
 
This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top