Cruzer Jango gauntlet run!
- Thread starter Cruzer
- Start date
Foxbatkllr
Well-Known Hunter
It's easy...although I had to take a dremel to cut off the non-threaded part to take out the bulb. It's actually not an LED, it's a bulb inside a red encasing. After I took the bulb out, I hit the top of the red casing with a rubber mallot and it came out easily.
Cruzer
Well-Known Hunter
Yeah, it's not removing the red lense that concerns me, it's whether a 5mm red LED will fit in the hole. I'll run to RS later today and pick up a few red LEDs to try it out. If they fit, then the chrome housings will be usuable and just the lenses will have to be taken out and replaced with red LEDs. I'm crossing my fingers till then!
Foxbatkllr
Well-Known Hunter
Instead of using an LED, just replace it with a mini-krypton bulb. That's what I'm doing. They are brighter than LED's and can be found at Radioshack. That's what I used for my jet pack beacon. Here's what Batninja did: http://www.thedentedhelmet.com/showthread.php?t=22395
But if you still want to use an LED, a 5mm Red LED fits in the chrome housing just fine. I just tried.
Edit: Just realized the mini krypton bulb thing won't work unless you have the red cover. In my circumstances, since I have the taller Halo_1 LED I can just take the red light cover from that and put it in the lower profile one.
But if you still want to use an LED, a 5mm Red LED fits in the chrome housing just fine. I just tried.
Edit: Just realized the mini krypton bulb thing won't work unless you have the red cover. In my circumstances, since I have the taller Halo_1 LED I can just take the red light cover from that and put it in the lower profile one.
Last edited by a moderator:
Halo 1
Well-Known Hunter
The only krypton bulbs I found were tiny and weren't red.
It looks like the red 5mm LEDs from RS fit, so we're good to go with just buying the variant colored housings.
Copy that bro, I'll head down to the store during lunch sometime this week and keep you posted.
Awesome work guys, on the accuracy!
Stay safe,
Tim.
jangofett76
Active Hunter
Those Jango gauntlets looks good.
Once I get enough money I'll buy one (gauntlet kit, missle and hardware kit).
Once I get enough money I'll buy one (gauntlet kit, missle and hardware kit).
jangofett76
Active Hunter
Cruzer, I see the list is closed. Are you going to do a second run? Thanks.
Cruzer
Well-Known Hunter
Thanks. After this run, I'll just take single orders on a continuous basis as I have the time.
SEEKER
Well-Known Hunter
Halo 1
Well-Known Hunter
L,
Got the payment. Thanks again bro. :cheers The LEDs shipped out today via Registered Mail, just in case. RR numbers sent via PM, don't wanna clutter the thread up.
As for my Alien Suit, it's taken a backseat till I locate a Protec Full Cut Helmet for the Headpiece.
Stay safe!
Tim.
Got the payment. Thanks again bro. :cheers The LEDs shipped out today via Registered Mail, just in case. RR numbers sent via PM, don't wanna clutter the thread up.
As for my Alien Suit, it's taken a backseat till I locate a Protec Full Cut Helmet for the Headpiece.
Stay safe!
Tim.
Last edited by a moderator:
Darth Hobbes
New Hunter
Ok guys, small update:
Darth Hobbes can confirm that on at least one night I stayed up till 2 a.m. just to pull cured pieces out of the molds...as I was also playing Call of Duty 4 on Live while waiting for the resin to cure!
:cheers
SOLOCHASER
Active Hunter
Can I still order a missle?
Similar threads
