Bobamannen's ROTJ build

[Bobamannen]

Hello again everyone!

My ESB Boba Fett build is nearly complete and I only have a few final pieces left to finish it off. Honestly, I wasn’t planning on starting another Boba Fett build, but here I am diving into a ROTJ version this time. So far, I’ve gathered the following items:

Acquisitions:

• MinuteFett ROTJ helmet, painted by NixFX with metal parts
  
  
• MinuteFett ROTJ armor
  
• MOW Balaclava
  
  
  On the way in the mail:
• Bigdane jetpack harness
  
  
• Woodman ROTJ cape
  
  
• Irongladiator ROTJ cape greeblie
• 
  
• US Divers CO buckle
  
  
• Dental mirror No.4
  
  
• WestabyEletronics chest display
  
• 
  
  On order:
• Minutefett ROTJ gauntlets
• 
  
• Minutefett hollow fiberglass ROTJ jetpack (To be painted by Minutefett.)
  
• Coupling part red
  
  
• 3P XLR Female Right Angle Microphone Connector
  
  
• XLR 5-Pin Female Connector
  
  
• Eaton Push Switch (Part: 8411K12)
  
  
• XLR 3-Prong Connector
  
  
• BNC Connector
  
• WF boots
  
  
• Girth Belt
  
• Clothears ROTJ gloves
  
  
• Arkady flight suit and vest
  
  
• Handmadehorrorshop's ROTJ leather ammo belt
  
• Woodman rotj braids
• 
  
• Sidewinder EE3 ROTJ blaster
• 
  
• Patterson Squeegee
• 

Updated: 25/04/25

 

[ShortFuse]

Good start. You don’t really need the 4th shin tool for ROTJ. It’s not supposed to have the survival knife (paint stirrer) either, but I have one for my ROTJ kit.

 

[Bobamannen]

Good start. You don’t really need the 4th shin tool for ROTJ. It’s not supposed to have the survival knife (paint stirrer) either, but I have one for my ROTJ kit.

Thanks for pointing that out I didnt realize before now that ROTJ only has 2 shint tools, my bad!

 

[lowberg]

Lets goooo!!!!!!

 

[BudaFett]

Armor is looking good!

 

[Krewkid82]

Looking good!

 

[Bobamannen]

First Update on My ROTJ Build:

Things are moving along! I’ve now received the cape, cape greeblie, chest display, jetpack harness, (ESB braids for my other build,) girth belt, and the US Diver buckle in the mail.

I mounted the cape greeblie with help from Irongladiator, really happy with how it turned out. The only hiccup was that the hole in the cape tore a bit when I removed the metal part, but that should be an easy fix with a fabric patch or some stitching.

I’ve also picked up a leather belt from Grue at Handmade Horror Shop, a secondhand EE-3 blaster from Cbrant, and secondhand ROTJ braids by Woodman from Cdyoung.

I’ve ordered Minutefett gauntlets along with the jetpack he’s working on for me. The soft parts from Arkady have arrived at Minutefett as well, where they’ll be weathered and have the grommets mounted. He did the grommets on my ESB vest, and they came out awesome!

Next up on my list is dyeing or painting the girth belt, since it’s currently white. I’m still figuring out the best dye or paint to use, so if you have any tips or recommendations, I’d really appreciate it!

 

[ShortFuse]

Next up on my list is dyeing or painting the girth belt, since it’s currently white. I’m still figuring out the best dye or paint to use, so if you have any tips or recommendations, I’d really appreciate it!

I used an acrylic Minwax stain. I think the color was barn red, if I remember correctly. You can thin it out with some water. I filled a plastic container with it and dipped the girth belt in it. You need to work the stain into the fibers with your hands (wear rubber gloves) and then wring out the excess. Hang it up to dry.

 

[lowberg]

+1 for stain, makes a mess and takes a day or two to dry but will not rub off on your suit! You can rub Vaseline on the buckles to help avoid staining over the metal, but any stain on the metal will come off with a scrub pad

 

[BudaFett]

Gotta go with the stain. It will make the girth belt less soft than it is now, but that'll work itself out with trooping and moving in it.