Slave1Pirate's Aluminum ROTJ Boba Fett Build PIC HEAVY

Slave1Pirate117

Slave1Pirate117

Hunter
Hello everyone! I am new to this forum but have been a member of various cosplay forums. I am going to begin an All Metal Boba Fett ROTJ Boba Fett build with no desire of a 501st certification. My plan is to start with the base of the outfit: The soft parts like the flight suit and what not. During this time I will be purchasing the necessary components that I find as I go. Below is also my list of where I am at on the suit.

1. Jumpsuit: Arkady; in possession
2. Flight Vest: Arkady/ARMOR MOUNTED
3. Hip Pouches: Arkady; in possession
4. Ankle Spats: Arkady/WEATHERED
5. Ammo Pouch Belt: Self making new design/COMPLETE
6. Cape: self making-COMPLETE
7. Armor Plates: self made sheet aluminum/AWAITING PAINT
8. Helmet: self made sheet aluminum/in process
9. Knee Greebles: self made aluminum/AWAITING PAINT
10. Flight Stabilizer: self made aluminum-COMPLETE
11. Jet Pack Beacon: soon to be self made
12. Chest Digital Display: Fettronics/IN POSSESSION

Parts found and ordered so far:
1. Working Casio MQ-1 Calculator
s-l1600 (1).jpg
2. US Army Half Shelter Olive
s-l1600.jpg
I would also like to show you some of my prop/project history. I have a machine shop so this project should be a wee bit easier :) I also have a website www.jackdawslanding.net
136980706_414870036493832_8235129424719756280_n.jpg
All metal Boba build site
10551088_10203846050766003_6011366593710506060_n.jpg
Halo themed bike and Master Chief Helmet
16826136_253119858471904_2937216564650096728_o.jpg
Jurassic Park Barbasol Can
21752223_343612476089308_256051427940625197_n.jpg
Jack Sparrow's Snake Belt
120017384_1031024650681417_1679306646016926631_n.jpg
William Wallace's Baldric from Braveheart

Will be updating soon my progress!
 
Last edited:
While I wait to hear back from Arkady about a possible flight suit, I am going to start designing metal parts. The jet pack looks to be the hardest so I am starting there. I found Wizard of Flight's template and I am converting it into sketches on a 3D modelling software that I can plug into the CNC plasma cutter and hopefully have some awesome parts. Here is the first part I wanted to play with. Still working on the angles of course.
Screenshot (8).png
 
So this is proving to be super difficult. Because I am tracing it in the 3d modelling software, the angles are off, measurements incorrect, etc. Assembling it on the laptop is proving to be difficult.

Screenshot (10).png
 
:grumbles: So I did that thing. You know, that thing where you find something and get so excited because you haven't found any but you found one and impulse bought it? Yea. I bought a Casio MQ-2......2! Not 1....2! Ugh. I'll have to modify it for my needs.
20210112_080721.jpg


20210112_081734.jpg


20210112_080743.jpg


20210112_080802.jpg
 
Last edited:
This thread is more than 7 months old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Bobamannen
Bobamannen's ROTJ build
Replies
9
Views
319
BudaFett
BudaFett
C
Boba Fett Costume Build
Replies
4
Views
540
SPY007
SPY007
jangobobango
Budget Boba build Aliexpress base
Replies
12
Views
522
jangobobango
jangobobango
azheat
My Life-Sized ROTJ Boba Fett Build (3rd Attempt)
Replies
1
Views
513
ShortFuse
ShortFuse
AdenSolu
A'den Solu's ROTJ SE Build
2
Replies
28
Views
1,209
AdenSolu
AdenSolu
Back
Top