Jc27 Self Contained RF light kit

The light kit is self contained, so a hollow stalk is not needed. This kit will fit a few different RF toppers like ones from Animefan or ones that are modeled after the Master Replicas topper. It WILL NOT fit toppers made by FPH2, TF, and BOBAMAKER.

 

[kndys]

The light kit is self contained, so a hollow stalk is not needed. This kit will fit a few different RF toppers like ones from Animefan or ones that are modeled after the Master Replicas topper. It WILL NOT fit toppers made by FPH2, TF, and BOBAMAKER.
View attachment 181823

Do you know if anyone makes a light kit that does fit a bobamaker topper?
Thanks!

 

[Jc27]

No one I know of. I was working with him on a kit specifically for his helmet kit but we couldn’t work out a mutually beneficial monetary price.

 

[kndys]

The light kit is self contained, so a hollow stalk is not needed. This kit will fit a few different RF toppers like ones from Animefan or ones that are modeled after the Master Replicas topper. It WILL NOT fit toppers made by FPH2, TF, and BOBAMAKER.
View attachment 181823

No one I know of. I was working with him on a kit specifically for his helmet kit but we couldn’t work out a mutually beneficial monetary price.

No worries. If you ever pursue it to point of selling/ even making a one off, would be very interested. Thank you.

 

[Funkyred]

Deleted

 

[kndys]

Ubhif makes a self contained kit that fits inside his own topper. You would have to switch the topper over.

Thank you. Will check in with him.

 

[kndys]

Thank you. Will check in with him.

So sorry guys. Totally new to the forum. What would easiest way to contact ubhif? Is there a way to direct message?

 

[Jc27]

So sorry guys. Totally new to the forum. What would easiest way to contact ubhif? Is there a way to direct message?

My light kit will fit ubhif's RF topper.

 

[Jc27]

Ubhif makes a self contained kit that fits inside his own topper. You would have to switch the topper over.

I don't want to be "that guy", but this thread is a sales thread for one of my kits. Mentioning someone else's stuff here is kind of not cool.

 

[kndys]

My light kit will fit ubhif's RF topper.

So I would have to replace bobamaker’s RF topper and then add your light kit to that, correct? Easiest way to reach out to ubhif?

 

[Jc27]

So I would have to replace bobamaker’s RF topper and then add your light kit to that, correct? Easiest way to reach out to ubhif?

No one makes a light kit that kits the Bobamaker rangefinder. If you want to use the Bobbamaker topper, you most likely won't have a light kit available for it. Again, this is a sales thread for my kit, so if you have any questions about someone else's stuff, please put it in a different thread.

 

[kndys]

No one makes a light kit that kits the Bobamaker rangefinder. If you want to use the Bobbamaker topper, you most likely won't have a light kit available for it. Again, this is a sales thread for my kit, so if you have any questions about someone else's stuff, please put it in a different thread.

Very sorry. Learning my way around the forum.

 

[Funkyred]

I don't want to be "that guy", but this thread is a sales thread for one of my kits. Mentioning someone else's stuff here is kind of not cool.

My apologies, I didn't realise this was a sales thread, I just clicked onto the new content icon and replied to a question. Seriously uncool, sorry.

 

[Lynn TXP 0369]

I just got one of these and it fits my 3D printed Shapeways RF topper that I had perfectly..

Rangefinder Housing by toolguy301 on Shapeways

Check out Rangefinder Housing by toolguy301 on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Polaroid View Finder Lens by toolguy301 on Shapeways

Check out Polaroid View Finder Lens by toolguy301 on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Perspex Block with lens for Rangefinder ESB by toolguy301 on Shapeways

Check out Perspex Block with lens for Rangefinder ESB by toolguy301 on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

 

[Jc27]

I just got one of these and it fits my 3D printed Shapeways RF topper that I had perfectly..

Rangefinder Housing by toolguy301 on Shapeways

Check out Rangefinder Housing by toolguy301 on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Polaroid View Finder Lens by toolguy301 on Shapeways

Check out Polaroid View Finder Lens by toolguy301 on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Perspex Block with lens for Rangefinder ESB by toolguy301 on Shapeways

Check out Perspex Block with lens for Rangefinder ESB by toolguy301 on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

Awesome, I wasn't sure the self contained kit would work with that perspex block.

 

[Lynn TXP 0369]

Without a hitch for the whole assembly. I may have to glue it in place as it can be pushed out of it's holes if you touch it wrong.

 

[killerkeith]

Hello
I am trying to purchase 2 light kits but your 'buy it now' button doesn't want to give me that option, any ideas on how to proceed? Thanks.