Rub n' Buff won't dry

[Naglium]

So i'm trying to use Rub n' Buff silver metallic on some home-made Jango knees (PVC pipe and Sintra).

After a few days, i keep getting some silver rubbing off on my hands. I thought i "buffed" it in well enough. I even used a heat gun on low for a few minutes, and then scrubbed and scrubbed with my hands and paper towels, and it STILL comes off..

Any thoughts??

 

[Solo]

Not sure... I just buffed until it felt smooth to the touch like running your hand over metal. I haven't had any issues since. My first guess is that it needed to be buffed more but could it also be related to humidity or temperature?

 

[Jango 5204]

I've always had a small amount of silver eventually wear off. rub the heck out of it.

 

[Naglium]

I've always had a small amount of silver eventually wear off. rub the heck out of it.

thats probably what im gonna have to do... sigh...

 

[SharkForge]

That or you may have just had a little more than you needed when you were buffing it. Try wiping it off a few times till it stops rubbing out and see what it looks like. It may be dry and you are just getting excess rub n buff, but I wouldn't know for sure. Just a wild guess :3

El1te