Custom Mando :D (Pic Heavy)
- Thread starter Ordeyn
- Start date
Aden Kyramud
Active Hunter
Something Dem and I do is cut a slot in the bottom (inside) of the gauntlet, then fill it with resin and slush that around the inside; as it soaks into the cardboard it will began to become a solid mass with the cardboard acting like the fibre in a normal glassing job.
Then we usually do a brush-on coat on the outside (or maybe two...) then sand it a bit...makes really strong gaunts, if a little brittle (resin without glass tends to do that...)
:cheers
A'den
Then we usually do a brush-on coat on the outside (or maybe two...) then sand it a bit...makes really strong gaunts, if a little brittle (resin without glass tends to do that...)
:cheers
A'den
Last edited by a moderator:
I mean you can bonk someone on the head and OUCH 
SaberMaker
Hunter
Ord'ika that looks amazing!
A'den and Adonian: Thanks for the resin tip, I'll keep that in mind.
A'den and Adonian: Thanks for the resin tip, I'll keep that in mind.
Last edited by a moderator:
Aden Kyramud
Active Hunter
HE LIVES!!! CREON!!! How's it going vod?
and yes...me too...I sew with rivets...
and yes...me too...I sew with rivets...
Last edited by a moderator:
Ordeyn
Active Hunter
Creon! Yo, ad'ika. Aw, it's not that bad! Well, I had my mom with me the whole time in case I really screwed something up. :rolleyes But still...
Okay, so I'm going shopping on Friday and I need to know what brands and blah to buy...and what to buy! Not clothes, but like bondo-glass and that stuff. What do I need to glass my gaunts and helmet? Help me make a shopping list guys! 
Okay, so I'm going shopping on Friday and I need to know what brands and blah to buy...and what to buy! Not clothes,
but like bondo-glass and that stuff. What do I need to glass my gaunts and helmet? Help me make a shopping list guys!
Last edited by a moderator:
Fractal Fett
Hunter
Looking good Ord'ika!!!
Last edited by a moderator:
If you are going the Bondo Glass route you will need:
Bondo glass
Sanding paper grit of about 400
Sanding paper of about grit 800 - 1000
Wet and dry paper of about grit 1500 up
A dust mask
If you are going the fiberglass resin way you will need:
A fiberglass kit
Several cheap paint brushes (Dollar stores will do these best)
Sanding paper grit of about 400
Sanding paper of about grit 800 - 1000
Wet and dry paper of about grit 1500 up
A dust mask
Rubber gloves to protect your hands.
Bondo glass
Sanding paper grit of about 400
Sanding paper of about grit 800 - 1000
Wet and dry paper of about grit 1500 up
A dust mask
If you are going the fiberglass resin way you will need:
A fiberglass kit
Several cheap paint brushes (Dollar stores will do these best)
Sanding paper grit of about 400
Sanding paper of about grit 800 - 1000
Wet and dry paper of about grit 1500 up
A dust mask
Rubber gloves to protect your hands.
Last edited by a moderator:
Aden Kyramud
Active Hunter
400 grit? I start with 40 grit...
Last edited by a moderator:
