Right Gauntlet Plugs & Connectors?

[ConvergenceProp]

Cant remember if there was already a thread on this, but has anyone found a source for the correct size jack plugs and connectors for the right Gauntlet?

 

[smuggler_fett]

01hawk has looked into this

 

[Darth Voorhees]

they always looked like the normal small headphone size plugs/jacks to me, ( 1/8th inch i believe) but i havent tried to confirm it yet. I was thinking about doing this set up to run wires though to the switches if i was to use them for sound clips, or smoke etc.

 

[ConvergenceProp]

So just as a follow up, I ended up ordering these up to give a shot. I'll post pictures when I get them.
Mono Male Jack-Plugs
https://www.amazon.com/gp/product/B01G0NF9CY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Two different versions of Female plugs
https://www.amazon.com/gp/product/B01C3RFHDC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B00ZSX761U/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

[01Hawk]

I think I used regular 3.5mm males in mine. I need to redo them and currently have it screwed in to keep the connectors from snapping off.

 

[ConvergenceProp]

Thats kinda what my thinking was too. Gonna countersink the bodies of these into the connector for more ridgid stability

 

[ConvergenceProp]

I'm still playing around with this a little bit, but this is what I came up with.
I'll probably 3D print a new housing for the jack-plug housing for a slightly cleaner fitment as there's a little binding where I didn't drill the bores in the resin housing quite straight enough

 

[Artakha]

Beautiful.

 

[TheZeroEffect]

That’s awesome, always love details

How well does it stay connected?

 

[ConvergenceProp]

So far it’s actually a surprisingly sturdy setup. The two plugs kinda reinforce one another

 

[TheZeroEffect]

I was wondering if that was the case... cool

 

[Fatbed]

Wonder how one or two well hidden magnets could help support, reduce strain on plugs or the body

 

[ConvergenceProp]

Got in the other type of female jack sockets and I gotta say I like these a lot more than the first type I tried
They’re much stronger and easy to adjust from the inside of the Gauntlet if need be, and the washer nuts are also .020” thinner, giving them a more low profile look like seen on the PP1 and ST suits above

 

[BudaFett]

Amazing, looks great!!