Mythos Boba DC-15a

Delta13Mike said:
Yesterday I found something intresting, I was looking at some sideshow clone satues when I took a closer look at DC-15a they are carring"
100206-clone-trooper-deluxe-veteran-004.jpg

It is the same simplefied desighn as Boba has. What allowes me to belive that it shood be DC-15a replica with some modfications.

Mike
Click to expand...

a few....
 
Last edited by a moderator:
Thanks Fett Spec:)

Well if we asuume Sideshow DC-15a is so simplified and Baba have same gun with elongated barell, bipod and reloding lever then it is actualy it.
 
Also the stock has a kind of hook like thorn thing on the bottom...its loosely based on the DC yes....but I think they only used the main portion

SWMythos_BobaFett_WIP1.jpg
 
Last edited by a moderator:
Filler, For what the plans show, it shood be 140cm as standard DC-15a plus that longer barrel.

I saw that pictures Fett 4 Real I just guess that I'm thorn beetween some parts of oryginal DC-15a and custom one.
 
atrophical said:
Amazing build, I don't think I would have been able to do that lol. How much time do you think you have into it so far?
Click to expand...

Thank you! :)

It is actualy quite simple bulid. I mean it is not too complicated in general shape. Straight angel and quite big elements. Not like in this toy:
DSCN3836_zps3338d102.jpg
I had some fun with that DC-17m well still have actualy. But back to the topic, Tubes are just PCV pipes, and much and that main tube hold whole thing and that make life much easier.
So far? Hard to tell as I work on it when I have some time but I guess aroud 8 work hours? Well totay I was working on stock and that was like 4h. but woodwork is time consuming. But I assume details will take much more time then the big parts.

Mike
 
Last edited by a moderator:
So progress have slow down a little, lots of gaps to fill with putty and sand down over and over again.
Also I made some non visible details just to make a break with sanding the barre;
lol.gif
This is it, the battery pack for light in the scope, I added some greeblies to make it look like some piece of technology:
DSC_0461mini_zpsyqq85nzf.jpg


Then the end of the barrel, you can see lots of putty I had to use:
DSC_0462mini_zpsswqyuhie.jpg


And finaly stock. For now it is very rough machied shape (and I don't have well equpied woodworkshop) so lots of hand sanding and detail work awaits:
DSC_0463mini_zpsdgtpsp1n.jpg


Mike
 
I'm seriously considering making some brother.:) But it wold have be hand made limited edition as I don't see how I can cast that beast... btw. I love how massive it is, it have that WW1 trench used rifle spirit, you just like to put bayonet on it and charge:lol:

And I made decisions according the Mythos modyfiations. I will make them addable and removable. The barrel would be like silencer to put on, same thing bipod. To be honest I alveys waned to make just 15a but mythos gave me motivation to do so, but in proces I just melted over desing of standard rifle and I like to keep it all and make itven cooler with mythos extra parts.

Any way, I may make some of these toys;)
 
This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

MAULFETT
My Boba fett throne from Puerto Rico
Replies
3
Views
928
robotzo
robotzo
MAULFETT
Jabba throne for My Boba Fett throne
Replies
0
Views
577
MAULFETT
MAULFETT
MAULFETT
Boba Fett throne
Replies
4
Views
1,651
MAULFETT
MAULFETT
MAULFETT
Rancor Head for the Boba Fett throne
Replies
0
Views
1,231
MAULFETT
MAULFETT
Lilac Fett
Mounting Boba Fett Knee Darts
Replies
1
Views
1,291
ShortFuse
ShortFuse
Back
Top