General Holiday Special Boba Fett WIP

VutycFett

Hunter
Holiday Special Boba Fett
I just wanted to use this thread for me to organize my work and to hopefully get feedback from the community who stumbles across this to get feedback so I can improve.

This is the first time working on anything like this before. I am already kinda deep into it but I’ll post pictures soon.

Hard Parts:
Helmet DONE
Gauntlets
Collar DONE
Chest and diamond DONE
Shoulders DONE
Cod and kidney DONE
Knees DONE
Back Plate DONE
Jet Pack DONE
Jet pack harness

Weapons:
Amban phase-pulse blaster
k-11 blaster DONE

Soft Parts:
Jumpsuit
Flak DONE
Gloves
Boots DONE
Cape DONE
Face mask
Holster with belt
Braids
 
Last edited:

VutycFett

Hunter
Cutting and prepping

For the first part I’ve mostly been focusing on my hard parts.

My chest piece wasn’t to difficult but I did cut this one out of sintra.
BBD1B0FF-9086-4965-A41D-6CF901278092.jpeg

Then once formed I went onto the cod and kidney. I cut that one as well but then I used bondo and some filler to get that curved part of the cod. I also have the kidney I just forgot to take pictures in this stage
33F6EA48-1A35-47C1-95F7-5DE8E0A18AE0.jpeg 4914531E-0CBD-43A3-BCAD-AC0E24A69352.jpeg 59ADCAE7-9535-4DCC-BF7A-0DDA33E22C4E.jpeg 6E00A72A-46C0-4FEC-939F-A64B6861EB11.jpeg

Additional I cut collar out as well, but for the back plate I just purchase one and went about attaching the two via the bolt method.
0D862412-9558-4F06-BF2F-27CA74888F9F.jpeg
 

VutycFett

Hunter
Painting

So for the painting I did the masking method to show damage, but I kinda mess up and had to re do it sense I wasn’t satisfied.

I stuck to the original colors of the cartoon instead of the 1/6 people tend to lean towards sense I like the yellow and grey combo.
4EEA7875-865F-4A2A-A031-687D224B310F.jpeg
For reference so you can see what I messed up haha.
95876040-C9A7-48B8-922B-CF2587D538ED.jpeg
And how I painted it minus the collar at this point. I painted the cod and kidney the wrong color (which I liked). I also didn’t like how much space the blaster dents took up on the left chest belt. So I changed it all cause wanted to look like the cartoon colors.

This is were I did the layering technique to the armor. I redid every piece to the more like the reference but still have damage and I added abit of extra to it.

I stated with just the cod, kidney, collar and shoulders. I redid the grey parts because when doing the layering I noticed the blue on the cod and kidney cane through so I liked and added it to the rest.
E1FCA224-A21A-4B0D-B15B-418BA361FF2E.jpeg
1871A677-398B-46D9-8B9A-53CFA8085537.png
After I went on to the chest and did the layering technique to it as well and to shrink down the size of the damage on the chest.
C2B825A2-5676-495A-AEEE-5D9D03D4206D.jpeg
This is how it came out in the lighting. Plus I did my knees!
F8DFF84B-1B69-4B94-A622-EEAFF3E627FC.jpeg
The armor took on a different color once I moved it to a different spot. Here is all of it together with my cape too.
852B290E-76AD-4763-8824-B7CBFABFF2E3.jpeg
 
Last edited:

VutycFett

Hunter
Shoes
I finished my shoes up they weren’t to bad to do. I got them from Imperial Boots and then the shoe darts from QuestDesignCanda. The only thing is I need to figure out what to use on the bottom of the shoe so the black doesn’t rub off when walking.
248A07E5-8D1F-4169-8D4B-02A60FCAF9DF.jpeg
5E7FA831-2091-49DE-B102-0A0562C91A84.jpeg
FF18C126-C600-4BF5-A8A1-4FBE0BEFEB19.jpeg
CAC65138-B3B6-4A40-B8A7-F7D78ECEC7D2.jpeg
79B10FAD-7B8C-4C11-BF04-ADFB8AD084CA.jpeg
 

VutycFett

Hunter
Flak Vest
Recently I was able to pick up a vest and I attached the armor to it! I think I attached them correctly but if a genie had any pointers then would be appreciated! Also I know I don’t have the correct back plate just decided to use this one.
C5AC7633-97E8-4BF5-88FB-F66711CAF0D3.png

5F7DE3CB-16A2-41A1-9A23-7277FA21668B.png
33425227-818D-49D3-A8BA-8E18A0BDBBC7.png
 

VutycFett

Hunter
Jetpack

For the jetpack I’d didnt get any molds from the makers on here. Got a 3D printed one which allows for some extra weight to be gone but does take away from the look of a single piece in some areas.
98DF4DEB-8A86-4236-85BF-78B8DA30833F.jpeg
01B33056-DD12-4B20-9CF1-8D530513C026.jpeg

So I started out by filling and sanding then primed the pieces. Then went over if needed and then put a coat of silver over them

86E8F27F-A5DF-4A1A-B36A-50E2A05EDE91.jpeg
Followed by painting the smaller pieces.
B49187F2-CACA-4F80-90A5-074DEDFB0994.jpeg
8BEA9094-1A4B-471F-BE71-91BF89E37E83.jpeg
BE7B38B4-49FE-495C-BC28-A0D9B248EAF0.jpeg
D491EE9F-4B3F-47BF-B79E-A65DE103BCD5.jpeg

Then I started to glue the pieces together.
1CC58432-4D3B-4BFD-B1B4-73A83F18E077.jpeg
Then this is what I came out with plus I got a working light and I all I gotta do now it attach the piano keys and then I am making a light kit for the thrusters!
07985A92-32AB-4DA0-A56F-34A3EE81E3D0.jpeg
145EF1F7-577B-4F47-B775-3A30253EF48A.png
 

VutycFett

Hunter
Helmet

Haven’t posted in a while so thought I’d share where I am at with my helmet so far. I purchased a MinuteFett for this.
C1C1DC46-9E1F-4B8C-97EE-71D1D85BDAF5.jpeg

Stated out like anyone does and cut out the visor, sanded it and drilled holes for the ears to be attached.
1DCB79F9-A962-4820-ACDD-BB747A9ADFC0.jpeg
C3012A0D-7452-42BD-B21F-058B5FE5E899.jpeg
4A3603AB-FAC9-4AF2-9C36-29C6E3649BDE.jpeg

Once I finished all that I went about priming and then laying the silver down.
53A25C20-1624-45B0-B29A-9DB6B9DE08D8.jpeg
FA113EC9-7A86-422C-9907-C9B81C0F50DD.jpeg
643F626D-2E41-42FE-A2C3-8A478268A8D2.jpeg
D213AED0-3BAC-47FA-A2E1-6D641FF90C30.jpeg
Then lastly just masking and painting.
882FFF16-3F22-440C-82B9-F9CD4BCE78FD.jpeg
81A7BF67-7989-4F13-B1ED-28687A767CDC.jpeg
A7983F81-DC11-40D5-B3C2-10F8A7F0B463.jpeg
Currently just working on the ears waiting for a hollow stalk and then put the rest of the pieces together!
 

Attachments

  • B2222D9A-9891-4400-85FB-44566AD26E13.jpeg
    B2222D9A-9891-4400-85FB-44566AD26E13.jpeg
    178.2 KB · Views: 24
  • 58F185FF-AED2-4ECA-82F2-0898B4C7EAD5.jpeg
    58F185FF-AED2-4ECA-82F2-0898B4C7EAD5.jpeg
    213.9 KB · Views: 21
  • 25B1D701-37E0-4635-83BD-6B4AE14AA6E4.jpeg
    25B1D701-37E0-4635-83BD-6B4AE14AA6E4.jpeg
    282.3 KB · Views: 22
  • 3DB00642-6022-44A3-BA63-21869E03300E.jpeg
    3DB00642-6022-44A3-BA63-21869E03300E.jpeg
    211.6 KB · Views: 22
  • 67D59BB9-B114-46DF-B088-82D61E950E5E.jpeg
    67D59BB9-B114-46DF-B088-82D61E950E5E.jpeg
    297.3 KB · Views: 22
Top