Beacon and Stabilizer sign up list

Put me down for a large set. I have a MLC jet pack and the width is slightly under 16". Paypal coming.

Geo
 
I have had some PMs about how these mount.
The stabilizer mounts by simply bolting it on.
The beacon has a "Hollow bolt" so to speak. First, drill your hole in your jet pack, freaky, I know. Then drop your wires in from the top and run your LED up into the beacon and turn it down snug with you hand.
Thats it :) .

One pic is with the flash. The other one I had to turn it off because the LED would not show up.

You could do it however you want but thats how I'm gonna do it.
(LED and wires not included)

-Tim-

DSC00540.JPG


DSC00542.JPG
 
Go ahead and put me down for a set, but I don't know what size to get... I'm using an MLC version1... I'll have to measure it tonight.
 
This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Coanc
First build Ever Update and first timer questions
Replies
9
Views
334
Builder
Builder
Media Man
ESB Armor and Gauntlets Paint Commission Quote
Replies
0
Views
162
Media Man
Media Man
Coanc
Boba ESB girth belt paint color and brand help!
Replies
3
Views
237
Coanc
Coanc
nWoHollywood
What are the differences between the ESB Fett armor made by MinuteFett, NeoProShop and Bobamaker?
Replies
10
Views
387
Ord Mantell
Ord Mantell
S
Recommended vendors and why
Replies
4
Views
665
viewoptic
viewoptic
Back
Top