I have a thread in the Sarlaac Pit with all of my other photos
Well Steve's computer broke, so he invited his friend and my CO Damien up to his house to fix it, and he also needed manual labour to clean up, reorganize, and throw away a bunch of junk. So he invited the garrison up to be the slave labor.
Steve said that you can touch and pick up anything you want, just as long as you put it right back where you found it.
Great work! The photos answer a question of mine. The Graflex used for the barrel is the different model than the one used for Luke's saber in ANH. You can tell by the machined "stripes" (rings) toward the end of the flash tube.
Something I noticed about the gun--in addition to the stabilizer and knee from the other thread, the ribbed looking thing behind the knee dart looks the handle to the Paterson mixer stir stick. Those of you that own one will recognize it.
In total, I have about 5 pictures of the ROTJ jet pack.
Included in my PM to SpideyFett:
I didn't get a chance to get the jet pack out, but believe it or not, the screen used jet pack was made out of foam. That way Boba could fall and roll around without a chunk of fiberglass on his back. The pack itself was extremely beaten up, the rocket had been torn off, along with the left thruster, they both were glued back on. The repair to the pack was pretty poor, the glue was exposed and the thruster wasn't glued on straight.
Just noticed that in the pics that Spidey posted the Graflex is turned with the "ears" up as though they were a gun sight, yet on the prop in the collection it is turned ninety degrees so that the "ears" are on the side.
It appeared to be held in with tape, the lower part of the tube was wrapped in tape and then slid into the resin Uzi. On the gun's right shot of the Graflex, you will see a square little shiney area, this isn't weathering, it's a metallic tape. It might be able to turn if you try to move it.