The Mandalorian pistol kit #2

superjedi

Sr Hunter
Hey all,
I just finished a second Mandalorian blaster. :)
The one I posted before was a 3D printed kit and this one is a resin kit that I got from a guy on IG.

20190921_110125.jpg 20190921_110216.jpg

The kit just needed some minimal sanding and trimming, and it went together really easily. Here's the kit as received.

20190828_161611.jpg

Like the first one, this was a lot of fun painting. I got to do some worn metal effects, which I don't get to do very often.

20190921_110300.jpg 20190921_110341.jpg 20190921_110433.jpg

Here are both blasters side by side.

20190921_110726.jpg 20190921_110823.jpg

Since I don't need two of these blasters, I'll be putting this resin version up in the Cargo Hold. (y)
Thanks for looking!
 
Loving these Mr Superjedi.

I get a buzz from the fact that the Starwars prop department have used 3 German pistols from the late 1800's early 1900s. The broom handled mauser, Luger and now this the Bergmann. These pistols are 120years old....... Mind blown!
 
One thing I've always enjoyed about the OT is that the blasters actually look like weapons. Because they are weapons!
They drifted away from that a little in the prequels, but glad to see they're using real base guns in this show.
Has anyone ever listed and shown side by side comparison images?
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top