Question about ESB EE3 Greeblies on Left Side of Gun (Non-Pistol Grip Side)

boba87fett

Active Hunter
Hi everyone,

I am getting ready to place my greeblies on my ESB EE3 and have found conflicting photos of the side of the gun that does not have the brass/gold pistol grip. Can someone provide guidance as to which is most accurate - or is it all just a guess on this side?

Thanks,
Steven
 

Attachments

  • IMG_6541_zpsiasfcmor.jpg
    IMG_6541_zpsiasfcmor.jpg
    411.8 KB · Views: 447
  • image.jpg
    image.jpg
    686.2 KB · Views: 455
  • 20181203_082809.jpg
    20181203_082809.jpg
    5.7 MB · Views: 377
Reference of that side is kinda iffy at best. From what I can tell it should look like this. But it looks like the AM plug closest to the grip falls off from time to time so that one missing would also be correct
 

Attachments

  • F38CC293-9F53-4AE3-8B4D-07E13F9A06A0.jpeg
    F38CC293-9F53-4AE3-8B4D-07E13F9A06A0.jpeg
    4 MB · Views: 432
This has been intrigued now? One of the blasters in your first post is mine and was how I received it from Sidewinder . I have looked through his EE3 thread and some of his early versions has the 2 earth plugs and then just the one?
 
The Hot Toys EE3 seem to have it both ways too. For whatever that’s worth...
 

Attachments

  • B9AE52A4-CACC-4AAD-BDD6-1D8C751B6AEA.jpeg
    B9AE52A4-CACC-4AAD-BDD6-1D8C751B6AEA.jpeg
    621.4 KB · Views: 413
  • 5094AF1A-F23E-4D10-99E7-65E6DAE9B0D8.jpeg
    5094AF1A-F23E-4D10-99E7-65E6DAE9B0D8.jpeg
    831.5 KB · Views: 435
  • 25B4F2F8-F8DF-451B-82BF-5736047640B7.png
    25B4F2F8-F8DF-451B-82BF-5736047640B7.png
    3.9 MB · Views: 434
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top