* Official* - "What are you working on right now" thread.

lets see...where to begin.

1) scout armor
2) weathering up turo's old JP to make it a boba JP. its sooo nice but i just gotta beat it up!
3) USCM armor. gotta have a bunch of ultimate badasses ready for d-con!
4) repaint of my chest armor. now that i have an airbrush i can weather it properly!
 
Last edited by a moderator:
Hmm let see.....

Sandtrooper.... TE ANH PVC Stunt bucket going on to GT armor, I have most of the parts for the back pack.

Fett upgrades as usual... :p New FP chest armor...... I hope a set of new knees and cod if I hear anything in the near future.

Not much else since our baby girl has arrived..

Lynn
 
Last edited by a moderator:
Right now, the only thing I am working on is the wife's costume. We have all the parts except the belt(*cough, cough* sith_camaro, check your PMs). The DP isn't coming out like I expected, so I'm probably gonna upgrade her to my MLC.
She's shopping around for a jump/undersuit.
My Jodo suit will be after hers is completely done.

Wes
 
Last edited by a moderator:
I am working on a nusery for my soon to be daughter. She is due October 8th so all focus is now on her. We also just moved into a new house that needed a lot of work and that has kept me very busy lately.

As always, improving my Fett.

Would love to do a Biker Scout.
 
Last edited by a moderator:
Here's what's going on in my garage.

1) Painting new Jango leg armor.
2) Assembling trooper armor.
3) Sewing a jacket for an Evangelion costume.
4) Making better boots for my Anakin costume.
5) Attempting to maintain my sanity.

Adam
BH/TI 6662
 
Last edited by a moderator:
Boba Fett:
-Trimming my JP + sanding
-sanding the missile/rocket for the JP(get rid of the air bubbles in the resin)
-Finishing up my helmet(paint)90% done.
-Gather together the last missing parts of my costume:)
-Attaching the armor to the Vest(pain in the ass) No matter what i do they wont sit in the places i want them.

C3PO head:
-Installing lights in the eyes so that they light up.
-Scratch buildt the antenna(cause the resin cast i had sucked horseheads.)
-Attaching some minor parts to the head.

Anh Trooper helmet:
-Glueing in the lenses.
-Attaching the aerators
-attaching rubbertrim around the edges of the opening.

That's about it i guess:)
 
Last edited by a moderator:

  1. <LI>Installing lights in my rangefinder (thanks Bobo)
    <LI>Narrowing down my list of tailors for my jumpsuit fabric (thanks Han Hunter)
    <LI>Building new knee armor once it arrives (thanks WebChief)
Other than that, I'm caught up and ready to hit some conventions. :love
 
Last edited by a moderator:
Well, this is my first costuming project before I go forward to other ones, like a Stormtrooper in the near future once I finish with the Fett.

At this time, things to finish my ROTJ Boba Fett;


  1. <LI>Waiting on MLC clear resin RF and FG stalk (thanks Bountys Hunted and MLC).
    <LI>To create the boots (thanks Boba Phat) and/or wait for Jango_Wes' source to finish them. (thanks Jango_Wes).
    <LI>Waiting for machined aluminum knee armor darts (thanks Webchief)

Estimate time of completion: 1 week (depends on our trustworthy Postal Service System and my seamdresser).

Other than that, it's just a matter of time to start upgrading the ammo belt, and upgrading to fiberglass armor and probably movie sized gauntlets (most likely than anything else).

Robert
 
Last edited by a moderator:
Working on my sand trooper. Can't get Boba done by Halloween.
Painting and weathering last part of chest armor.
Waiting for coveralls for xwing pilot.
 
Last edited by a moderator:
RE=Installing batteries in my trooper bucket.
Hunting for trooper boots
Waiting on MLC JP
Waiting on helmet, chest armor and gauntlets
Trying to get a good pattern for vest
Working on putting final touches on my x-wing helmet
Cleaning my bedroom :)
 
Last edited by a moderator:
I just did this this past week.

AlAurence1.jpg


No, it's not me. It's a 1/6 scale custom kitbash that I made everything for except the figure. Al Aurence. aka T.E. Lawrence.
 
Last edited by a moderator:
Thought I'd update on my projects:

[*] FG Helmet (still awaiting)
[*] Knees
[*] Jumpsuit mods
[*] RuffkinToy - Gauntlets
[*] MB - Jet Pack
[*] New Jaster Chest Armor
[*] Weathering my Jaster boots
[*] Jaster Pistols along with Rifle -

That's it :D
 
Last edited by a moderator:
arrrrgh....

<UL>
<LI>Merr-Sonn Munitions Class-A Thermal Detonator <font color="#FF0000">FINISHED 6-28-03!!!
<LI>Blastech DC-15 Clonetrooper rifle (95% complete)
<LI>Coruscant Guard rifle (99% complete)
<LI>The Emperor's Cane (95% complete)
<LI>The Emperor's Brooch <font color="#FF0000">FINISHED 6-25-03!!!
<LI>Fiberglass Clonetrooper armor (501st exclusive limited to 20 sets) ;) Should arrive 7-15-03!
<LI>Greedo mask upgrade (replacing eyes and repainting - 50% complete)
<LI>Wicket the Ewok 1983 plush doll hood (I bought him without the hood, and now I have to make one) 0% complete
<LI>Fett suit PA/FRS integration. By DragonCon I'll be able to select and use either my Radio Shack PA amp OR my Motorola FRS radio (both built-into my suit) with only ONE switch! :D 0% complete
<LI>Snowtrooper armor project. Ahh... vacuforming in the summertime... ACK! :facepalm
<LI>many other small projects to keep "the voices" away... ;)
[/list]
 
Last edited by a moderator:
Where should I begin....

* waiting for my second Dickies to arrive
* close to finally closing up and paint my JP
* finish up my Ruffkin gauntlets
* just got (yesterday) my girth, fresh from the farm (pee-you!)
* waiting for my mystery helmet
* need to finish weathering my blaster

Wow...I am tired! lol
 
Last edited by a moderator:
*Well, until I finish my research on the original JP harness, I cant finish my schematics for my JP. :(
*Still working on vacuform molds for JP.
*basically, everything for Boba :)
*Red Death project continues slowly, but at least it continues....
 
Last edited by a moderator:
Back
Top