Juan Solo
New Hunter
Where is yours coming from? Found this and inquired if they sell the MPP Microflash tube alone. Whaddaya think?MPP: Black Sidebars : Blemished* - Roman Props | Roman's Empire
Blaster MPP Flash Tubes
- Thread starter sith steve
- Start date
KenChan
Active Hunter
- Romans MPP tubes are near perfect in every way save for one issue; one of the holes underneath the button section is way oversized unfortunately. If you can find a Parks Sabers MPP that is still currently the best stand in for the tube in place of a vintage MPP, at least until Roman does his next MPP run where he’ll hopefully correct this
Last edited:
Juan Solo
New Hunter
Great suggestions KenChan! Thank you for the insight! Greatly appreciated!
Juan Solo
New Hunter
So, allow me to ask. Can one dissect a MR Vader hilt and use it in an EE3? I’ve seen several go for a reasonable rate. I’m not sure but Hasbro Black Seeies has a Vader saber as well but I am uncertain if the accuracy. Hmmmmm.Great suggestions KenChan! Thank you for the insight! Greatly appreciated!
KenChan
Active Hunter
Nah, for whatever reason the tubes on the MR vader hilt are over sized and wont fit inside the webley. Not sure how or why that happened during development haha
Right now the only real MPP clone options for us Fett heads are:
1.) Parks Sabers MPP -- I believe these are now out of production and the engravings aren't the best, but still fairly easy to find if you keep an eye out
2.) Roman Props MPP -- Readily available and almost 100% spot on save for the incorrect hole size under the button section (and maybe the discoloration in the chrome around the holes if that bothers you) The hole size is probably not a big deal for most since its facing inward when carrying the blaster.
3.) Korbanth MPP 2.0 -- This is the least accurate of the three in terms of how its made. It lacks any engravings around the hole ports and it also unscrews in the middle because its meant for FX Saber builds. Though you might be able to hide the seam under the front scope mount since the flash only sticks out 120mm from the tip of the webley barrel. No idea what the holes under the button section look like as I've never seen one in person
Right now the only real MPP clone options for us Fett heads are:
1.) Parks Sabers MPP -- I believe these are now out of production and the engravings aren't the best, but still fairly easy to find if you keep an eye out
2.) Roman Props MPP -- Readily available and almost 100% spot on save for the incorrect hole size under the button section (and maybe the discoloration in the chrome around the holes if that bothers you) The hole size is probably not a big deal for most since its facing inward when carrying the blaster.
3.) Korbanth MPP 2.0 -- This is the least accurate of the three in terms of how its made. It lacks any engravings around the hole ports and it also unscrews in the middle because its meant for FX Saber builds. Though you might be able to hide the seam under the front scope mount since the flash only sticks out 120mm from the tip of the webley barrel. No idea what the holes under the button section look like as I've never seen one in person
Last edited:
Juan Solo
New Hunter
EECHUNTAH!! ... Well, there went that idea!.... NEXT! =D
Juan Solo
New Hunter
That is sounding like a plan!! Maybe post some pics when all is said and done?!!
youre welcome...
intwenothor
Active Hunter
Yes
