Masking Helmet Sections

Assuming you haven't thought of it already, you should also use painter's tape.
Its usually blue and looks just like masking tape. The adhesive is gentler, since
its main purpose is for masking surfaces that are to be painted.
 
If you are using an airbrush you shouldn't have to mask it at all just card board pieces to block spray. To put on the stripes use a coat of semi gloss or dulcoate.

Lee
 
This thread is more than 20 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top