Mandalorian - Cold Cast Beskar Parts Questions

Hi guys,

Not a new member, but I've hardly posted over the years (mostly lurked). I have a question in regards to my cold cast Beskar parts. I was originally going to go for a battle-damaged S8E1 Mando costume, and I thought the cold cast armor would work really well as a base.

I received my kit, and it definitely has more than its share of imperfections due to the casting process and some minor damage in transit. As a result, the pieces will definitely require some clean-up and patch work. The problem is, I really don't have the skillset or time required to do any of this.

Ideally I'd sell this to someone who has the skills necessary to make this work to give the set a home. I guess my main question is, what would you guys think is a fair price point for this set?

The set includes the following:
  1. Helmet
  2. Chest plate
  3. Ab plate
  4. Left shoulder bell
  5. Right shoulder bell without mudhorn symbol
  6. Back plate
  7. Butt plate
  8. Left thigh armor
  9. Right thigh armor
  10. Left gauntlet (main gauntlet halves are fused)
  11. Right gauntlet (main gauntlet halves are fused)
90774895_2926398334264116_4283992460557811712_n.jpg
90783235_2322746584690918_7855816593966628864_n.jpg
90814572_915688308891893_1896991272577531904_n.jpg
90830532_1247118505491044_6365237237428256768_n.jpg
90831786_218188905966115_1660471465151037440_n.jpg
90851722_167649460938086_1955064629193342976_n.jpg
90874965_211800470100444_4430635885427425280_n.jpg
90880727_741278966698302_5939675019993939968_n.jpg
90883794_255556785605038_854317695808569344_n.jpg
90914195_521745708533038_5242583552767295488_n.jpg
90916046_254366352250876_5314361759182618624_n.jpg
90920824_2618989411722571_5115006389667758080_n.jpg
90952397_576030659669624_7526967363476914176_n.jpg
90954743_503673373659318_1328086054942539776_n.jpg
90960629_766593290535549_3171926832354164736_n.jpg
91007468_3007628799463555_9100396798068916224_n.jpg

So it basically has everything but the hip plates and shin armor. As you can see from the images it does need work.

Any help would be appreciated as I think about whether or not I choose to sell it down the line. I know I will definitely not make back what I spent, but I honestly just don't see myself doing anything with these parts. So I'm just looking for a fair solution. Thanks for your time!

Best,
Ralph
 
I'm interested, depending on price.
Listed it in the RPF for $1.200 shipped in the USA
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top