Jango Westars

[IzzyMel]

I bought a set of finished Westars. I did some additional work (sanding, filling in the gaps and repainted them). I tried to get them as close as I could to the Master Replicas. Let me know what you think.

Uploaded with ImageShack.us

 

[Mullreel]

those look sharp.

 

[OBrotherRacing]

Very Nice! Good job!!

 

[TK3944]

nice! What paint did you use?

 

[IzzyMel]

I used Chrome spray paint for the barrel, trigger, and clip. I used rub n buff on the handle and acrylic flesh wash for the copper metalic color.

 

[TK3944]

Sorry, what brand of Chrome? I used a chrome spray paint on mine, but they didn't come out nearly that shiny.

 

[IzzyMel]

I used Krylon Chrome Original Paint #1010. I used an auto primer 1st. I then used the Krylon paint for a 1st coat. Let it dry, then I wet sanded it with 1600 grit. After it dried I gave a 2nd coat. In order for me to get an even coat I drilled a hole in the barrel and used a long screw in the hole to hang the blaster. This way I could walk around the weapon spraying the blaster. Let me know if that helps.

Sorry, what brand of Chrome? I used a chrome spray paint on mine, but they didn't come out nearly that shiny.

 

[dynamic1]

Great looking blasters!

 

[decajun45]

Those are sweet looking blasters. I'm gonna need one for my Kal Skirata.

Christopher

 

[Zaley]

Where did you get those? 0_0
Great looking by the way!

 

[IzzyMel]

I'm not sure who the maker is... I bought them on the Cargo Hold Section.

Where did you get those? 0_0
Great looking by the way!

 

[Zaley]

Ok, well - congratulations for a nice piece of work on a nice pair of guns