BM v4 ROTJ paint up for Pmanino

Used stencils, reference pics, and an FPH2 ROTJ to map out the physical damage on the BM helmet which comes with no etched damage. Then used a dremel to cut in the necessary damage before priming.
 

Attachments

  • 70F4753E-4651-436F-B240-613772703E35.jpeg
    70F4753E-4651-436F-B240-613772703E35.jpeg
    1.6 MB · Views: 238
  • FD9D1600-DFA7-4BF0-9F08-9C48CE089C55.jpeg
    FD9D1600-DFA7-4BF0-9F08-9C48CE089C55.jpeg
    2 MB · Views: 269
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top