Reply to thread

Here the short version of how I finished my Stormrider EE3-Kit...


There was one thread here on TDH wich helped me a lot:

http://www.theden...ndex2.html


I put in a spring like in the orginal Webley:

[ATTACH=full]144784[/ATTACH]


It opens like the original gun:

[ATTACH=full]144785[/ATTACH]


Put some color on the wood, sanded it and oiled it in the end:

[ATTACH=full]144786[/ATTACH]



[ATTACH=full]144787[/ATTACH]



[ATTACH=full]144788[/ATTACH]


[ATTACH=full]144789[/ATTACH]


Used some metall-pins to secure the clued on parts:

[ATTACH=full]144790[/ATTACH]


[ATTACH=full]144791[/ATTACH]


[ATTACH=full]144792[/ATTACH]


Making a MPP-Flashtube out of a chromed barrel and secured it with a screw:

[ATTACH=full]144793[/ATTACH]


[ATTACH=full]144794[/ATTACH]


[ATTACH=full]144795[/ATTACH]


- - - Updated - - -


And here the mostly finished gun. Only the wire on the front scoperail is missing. And I need to put some of the black on the flashtube away:


[ATTACH=full]144796[/ATTACH]


[ATTACH=full]144797[/ATTACH]


[ATTACH=full]144798[/ATTACH]


[ATTACH=full]144799[/ATTACH]


[ATTACH=full]144800[/ATTACH]


This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top