Reply to thread

Message

Made a ton of progress this week. Finished the entire bottom portion of the helmet. Ordering some Testors clear coat spray that I'll put on prior to moving onto the dome. I found that my painters tape was taking off the silver. It was strange as that was the only color that was impacted by the tape. The silver is the only model masters paint I'm using which maybe has something to do with it. But lesson learned I guess. I'm assuming the clear coat will keep that from happening to the parts that I have finished.....
[ATTACH=full]158466[/ATTACH]
[ATTACH=full]158467[/ATTACH]
[ATTACH=full]158468[/ATTACH]
[ATTACH=full]158469[/ATTACH]
[ATTACH=full]158470[/ATTACH]
[ATTACH=full]158471[/ATTACH]

[QUOTE="SupRsloth, post: 460928, member: 9339"] Made a ton of progress this week. Finished the entire bottom portion of the helmet. Ordering some Testors clear coat spray that I'll put on prior to moving onto the dome. I found that my painters tape was taking off the silver. It was strange as that was the only color that was impacted by the tape. The silver is the only model masters paint I'm using which maybe has something to do with it. But lesson learned I guess. I'm assuming the clear coat will keep that from happening to the parts that I have finished..... [ATTACH=full]158466[/ATTACH] [ATTACH=full]158467[/ATTACH] [ATTACH=full]158468[/ATTACH] [ATTACH=full]158469[/ATTACH] [ATTACH=full]158470[/ATTACH] [ATTACH=full]158471[/ATTACH] [/QUOTE]

This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification