Reply to thread

Message

So, for basic approval, all you need is:
Jet pack sits snugly against the back armor hanging from two rectangular rings attached to weathered, white nylon/canvas shoulder straps that exit the back armor through the two slots in the back plate located near the shoulder blades.
The requirements of :
Jet pack is supported via accurate metal hooks that exit the rear of the upper and lower jet pack sections.
Jet pack is secured via an accurate scuba tank frame/harness (or replica). The jet pack attaches to the harness via a lower horizontal bar that the lower hooks on the jet pack rest on. Attached to the harness’s shoulder strapping should be weathered 1.5” white nylon/canvas straps with rectangular rings that attach to the upper hooks of the jet pack, keeping the pack in place.
The harness’ shoulder and waist straps are made of accurate black seat belt style webbing and is secured in the front by an accurate US Divers buckle (or direct metal replica).
Are for the optional Level 2/"Infamous" Program in the 501st Bounty Hunter's Guild Detachment, an optional program to recognize and award those that go the extra mile, but are not needed for basic approval and membership in the 501st.

Looks like form your introduction post you're from California? Your best bet will be to figure out which of the 4 California Garrisons you will be a member of, Central, Golden Gate, Imperial Sands (San Diego), or Southern California Garrison, and reach out to the local Garrison Membership Liaison and ask them what they want or need to see for the Jet Pac attachment.

[URL unfurl="true"]http://centralcaliforniagarrison.com/[/URL]
[URL unfurl="true"]https://www.501stggg.com/[/URL]
[URL unfurl="true"]http://imperialsandsgarrison.com/[/URL]
[URL unfurl="true"]http://southerncaliforniagarrison.com/home/[/URL]

The "Boba Thong" will be required, but it is a very easy piece to install. You just need a ¾ - 1” weathered white nylon, elastic or canvas strap that you glue to the Cod piece and then put Velcro or a snap on the other end of, that then attached to the Kidney Plate.

<blockquote data-quote="Cadet" data-source="post: 514807" data-attributes="member: 1684">So, for basic approval, all you need is:<ul>
<li data-xf-list-type="ul">Jet pack sits snugly against the back armor hanging from two rectangular rings attached to weathered, white nylon/canvas shoulder straps that exit the back armor through the two slots in the back plate located near the shoulder blades.</li>
</ul>The requirements of :<ul>
<li data-xf-list-type="ul">Jet pack is supported via accurate metal hooks that exit the rear of the upper and lower jet pack sections.</li>
<li data-xf-list-type="ul">Jet pack is secured via an accurate scuba tank frame/harness (or replica). The jet pack attaches to the harness via a lower horizontal bar that the lower hooks on the jet pack rest on. Attached to the harness’s shoulder strapping should be weathered 1.5” white nylon/canvas straps with rectangular rings that attach to the upper hooks of the jet pack, keeping the pack in place.</li>
<li data-xf-list-type="ul">The harness’ shoulder and waist straps are made of accurate black seat belt style webbing and is secured in the front by an accurate US Divers buckle (or direct metal replica).</li>
</ul>Are for the optional Level 2/&quot;Infamous&quot; Program in the 501st Bounty Hunter&#039;s Guild Detachment, an optional program to recognize and award those that go the extra mile, but are not needed for basic approval and membership in the 501st.&nbsp; Looks like form your introduction post you&#039;re from California?&nbsp; Your best bet will be to figure out which of the 4 California Garrisons you will be a member of, Central, Golden Gate, Imperial Sands (San Diego), or Southern California Garrison, and reach out to the local Garrison Membership Liaison and ask them what they want or need to see for the Jet Pac attachment.[URL unfurl=&quot;true&quot;]http://centralcaliforniagarrison.com/[/URL][URL unfurl=&quot;true&quot;]https://www.501stggg.com/[/URL][URL unfurl=&quot;true&quot;]http://imperialsandsgarrison.com/[/URL][URL unfurl=&quot;true&quot;]http://southerncaliforniagarrison.com/home/[/URL]The &quot;Boba Thong&quot; will be required, but it is a very easy piece to install.&nbsp; You just need a ¾ - 1” weathered white nylon, elastic or canvas strap that you glue to the Cod piece and then put Velcro or a snap on the other end of, that then attached to the Kidney Plate.</blockquote>

[QUOTE="Cadet, post: 514807, member: 1684"] So, for basic approval, all you need is: [LIST] [*]Jet pack sits snugly against the back armor hanging from two rectangular rings attached to weathered, white nylon/canvas shoulder straps that exit the back armor through the two slots in the back plate located near the shoulder blades. [/LIST] The requirements of : [LIST] [*]Jet pack is supported via accurate metal hooks that exit the rear of the upper and lower jet pack sections. [*]Jet pack is secured via an accurate scuba tank frame/harness (or replica). The jet pack attaches to the harness via a lower horizontal bar that the lower hooks on the jet pack rest on. Attached to the harness’s shoulder strapping should be weathered 1.5” white nylon/canvas straps with rectangular rings that attach to the upper hooks of the jet pack, keeping the pack in place. [*]The harness’ shoulder and waist straps are made of accurate black seat belt style webbing and is secured in the front by an accurate US Divers buckle (or direct metal replica). [/LIST] Are for the optional Level 2/"Infamous" Program in the 501st Bounty Hunter's Guild Detachment, an optional program to recognize and award those that go the extra mile, but are not needed for basic approval and membership in the 501st. Looks like form your introduction post you're from California? Your best bet will be to figure out which of the 4 California Garrisons you will be a member of, Central, Golden Gate, Imperial Sands (San Diego), or Southern California Garrison, and reach out to the local Garrison Membership Liaison and ask them what they want or need to see for the Jet Pac attachment. [URL unfurl="true"]http://centralcaliforniagarrison.com/[/URL] [URL unfurl="true"]https://www.501stggg.com/[/URL] [URL unfurl="true"]http://imperialsandsgarrison.com/[/URL] [URL unfurl="true"]http://southerncaliforniagarrison.com/home/[/URL] The "Boba Thong" will be required, but it is a very easy piece to install. You just need a ¾ - 1” weathered white nylon, elastic or canvas strap that you glue to the Cod piece and then put Velcro or a snap on the other end of, that then attached to the Kidney Plate. [/QUOTE]

This thread is more than 3 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification