tkRyno
Active Hunter
Let's get this ESB Fett out of the cargo hold!
CRL link for convenience: Costuming:BH Boba Fett-ESB - 501st Legion Databank
I bought this complete and approved ESB Boba Fett costume from TK-780 years ago, got approved (my expired number: BH-4658), trooped in it twice, had kids, moved, never got around to suiting up again. Why I'm selling: I'm just too busy and saving up for other things. Here are the original bullet points from the previous owner:
- Helmet FP Asok coldcast resin, painted with Humbrol paints, aluminum antenna smoked visor 3mm acrylic, purchased on ebay.
- Flightsuit, TDH bought Arkady, height 1.75m 95kg weight at the fightsuit suit was picked up about 2 inches in the middle because it was very long, so can extend a little more, in case you have given to be adjusted.
- Size L flack best done by Bat ninja TDH, neck TDH bought from the same material as the Flackbest and apart a neck made by a seamstress with a similar material included 2.
- Armor made of Abs, painted in shades of ESB with various techniques and paints, grabs vest with magnets.
- FP shoulder armor purchased in DTH.
- Chest-display made by fett tronics, uses AAA batteries
- Boots 11usa size, man of war studios and brings Toespikes aluminum made by Mojofett
- Jettpack made by Man of War studios, painted ESB style with paintings and techniques to set the tone.
- Arnes for jet pack, is a modified tactical harness with stainless steel hooks.
- EE-3 cast resin purchased on Ebay practical look much like the original, piece of original Flash (slightly different model) wooden stock made by a carpenter and leather strap.
- Wookie braids cape made by Woodman TDH style ESB, the Wookie braids are synthetic.
- Cotton Gloves made by a seamstress, with reference images.
- Shin Tools, original Paterson, painted and detailed ESB style.
- Girt belt in brown tone, completely original.
- Utility Belt, made of leather ESB style made by Lander
- US Divers belt buckle, completely original not replica, purchased on ebay.
- Sidearm pulce 40, purchased resin replica of Stormrider in TDH, painted and detailed for me.
- Holster for Sidearm, made by me in fiberglass.
- Gauntlets of Fiberglass, bought on Ebay, detailed and assembled by me, Flame tower with some aluminum parts. 4 aluminum darts purchased fenixprops and 2 augo alco toggle switch MPA 206N model.
- Knee made of fiberglass for me, with aluminum turned parts.
That was the info from the old owner.
Apologies I didn't keep records from which makers I got these, but happy to provide more pics and info. To the kit, I added:
-A higher quality and more accurate flame thrower assembly on the left gauntlet.
-Accurate cowl
-Helmet fans
-Helmet bag
-Blaster bag
-Comes with rolling HUSKY case if local
-Lighter weight sidearm
-More accurate shin tools
Happy to provide more pictures or details!
Overall fit: I fit into this at about 220lbs, I'm 5'9"
Shoe size, fits approximately 10-11 US. I have a wide foot I usually where size 11-12 US and these still fit nicely.
Asking $5000 or best offer
- Will ship, prefer local pick up or meet up near-ish Knoxville, Tennessee.
- Interested in trades for Boba Fett: Repainted Armor — The Mandalorian (S2)
CRL link for convenience: Costuming:BH Boba Fett-ESB - 501st Legion Databank
I bought this complete and approved ESB Boba Fett costume from TK-780 years ago, got approved (my expired number: BH-4658), trooped in it twice, had kids, moved, never got around to suiting up again. Why I'm selling: I'm just too busy and saving up for other things. Here are the original bullet points from the previous owner:
- Helmet FP Asok coldcast resin, painted with Humbrol paints, aluminum antenna smoked visor 3mm acrylic, purchased on ebay.
- Flightsuit, TDH bought Arkady, height 1.75m 95kg weight at the fightsuit suit was picked up about 2 inches in the middle because it was very long, so can extend a little more, in case you have given to be adjusted.
- Size L flack best done by Bat ninja TDH, neck TDH bought from the same material as the Flackbest and apart a neck made by a seamstress with a similar material included 2.
- Armor made of Abs, painted in shades of ESB with various techniques and paints, grabs vest with magnets.
- FP shoulder armor purchased in DTH.
- Chest-display made by fett tronics, uses AAA batteries
- Boots 11usa size, man of war studios and brings Toespikes aluminum made by Mojofett
- Jettpack made by Man of War studios, painted ESB style with paintings and techniques to set the tone.
- Arnes for jet pack, is a modified tactical harness with stainless steel hooks.
- EE-3 cast resin purchased on Ebay practical look much like the original, piece of original Flash (slightly different model) wooden stock made by a carpenter and leather strap.
- Wookie braids cape made by Woodman TDH style ESB, the Wookie braids are synthetic.
- Cotton Gloves made by a seamstress, with reference images.
- Shin Tools, original Paterson, painted and detailed ESB style.
- Girt belt in brown tone, completely original.
- Utility Belt, made of leather ESB style made by Lander
- US Divers belt buckle, completely original not replica, purchased on ebay.
- Sidearm pulce 40, purchased resin replica of Stormrider in TDH, painted and detailed for me.
- Holster for Sidearm, made by me in fiberglass.
- Gauntlets of Fiberglass, bought on Ebay, detailed and assembled by me, Flame tower with some aluminum parts. 4 aluminum darts purchased fenixprops and 2 augo alco toggle switch MPA 206N model.
- Knee made of fiberglass for me, with aluminum turned parts.
That was the info from the old owner.
Apologies I didn't keep records from which makers I got these, but happy to provide more pics and info. To the kit, I added:
-A higher quality and more accurate flame thrower assembly on the left gauntlet.
-Accurate cowl
-Helmet fans
-Helmet bag
-Blaster bag
-Comes with rolling HUSKY case if local
-Lighter weight sidearm
-More accurate shin tools
Happy to provide more pictures or details!
Overall fit: I fit into this at about 220lbs, I'm 5'9"
Shoe size, fits approximately 10-11 US. I have a wide foot I usually where size 11-12 US and these still fit nicely.
Asking $5000 or best offer
- Will ship, prefer local pick up or meet up near-ish Knoxville, Tennessee.
- Interested in trades for Boba Fett: Repainted Armor — The Mandalorian (S2)
