Reply to thread

Painted, weathered and installed the right gauntlet darts and knee launchers by Dakota.

[ATTACH=full]171941[/ATTACH]

[ATTACH=full]171942[/ATTACH]

[ATTACH=full]171943[/ATTACH]


Started work on the mysterious plate on the cape.

[ATTACH=full]171944[/ATTACH]

[ATTACH=full]171945[/ATTACH]


I eyeballed and corresponded its size and shape against reference photos to fabricate it out of styrene plastic.

[ATTACH=full]171946[/ATTACH]

[ATTACH=full]171947[/ATTACH]

[ATTACH=full]171948[/ATTACH]


The placement of the plate in the reference photos seems to be in the corner of the cape. My cape came with a grommet in that location so I removed it and marked the spot for the second screw.

[ATTACH=full]171949[/ATTACH]

[ATTACH=full]171950[/ATTACH]


I ordered some M4 round head slotted screws and will be able to share the assembly some time next week.


This thread is more than 2 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top