Balancesheet
Active Hunter
Not too bad for first try at changing the color 
Last edited by a moderator:
Ribann's Jango Fett (Finished March 2012)
- Thread starter Balancesheet
- Start date
Balancesheet
Active Hunter
One more pic. This is looking a little better....
Last edited by a moderator:
eopie herder
Hunter
Can certainly see a big difference!
Last edited by a moderator:
Archaster777
Hunter
I agree. The jumpsuit is looking much better than before. The color isn't as strong and looks faded like it's needed a serious wash or two due to intense bounty hunting.
Weather it's Boba or Jango, taking time to work with the jumpsuit like that can really pull a troopers outfit together. Looks awsome man!
Weather it's Boba or Jango, taking time to work with the jumpsuit like that can really pull a troopers outfit together. Looks awsome man!
Last edited by a moderator:
Balancesheet
Active Hunter
Weathering will come later tonight. Any last advice on adjustments? I have a garrison member coming over tomorrow help me suit up and take pics for 501st acceptance. Speak now or forever hold your peace 
Again, sorry for the bathroom shot I tried to edit out the toilet paper in Photoshop haha
Again, sorry for the bathroom shot
I tried to edit out the toilet paper in Photoshop haha
Last edited by a moderator:
eopie herder
Hunter
I was about to make a joke about missing a glove when I noticed the iPhone...yeah those things don't work so great with a glove on, so they?
Last edited by a moderator:
Archaster777
Hunter
the jumpsuit looks much much better dude, I love it! I would be surprised if you didn't get 501st status! The only thing that might mark some points down would be the creases in your belly armor. Both Jango and Boba had the same smooth curvature if I remember right but that could be an easy fix depending.
Good luck. You should be proud!
Good luck. You should be proud!
Last edited by a moderator:
Hey! those gauntlets are on backwards... and so it the range finder, you have it on the wrong side of the helmet 
just kidding man.
Yeah looks good, the only critique I see if that the collar needs to sit flatter and the thighs may be a smidge to close to the cod piece and could be dropped (towards your knees) about an inch or half an inch... but those are minor things, it looks awesome man!
just kidding man.Yeah looks good, the only critique I see if that the collar needs to sit flatter and the thighs may be a smidge to close to the cod piece and could be dropped (towards your knees) about an inch or half an inch... but those are minor things, it looks awesome man!
- No, Jango had the hard edges on the sides of the belly plate.
Last edited by a moderator:
Balancesheet
Active Hunter
Okay, well, I am kinda standing at a angle, so that might account for why they look so close in, Mullreel. I will double check tomorrow though 
TLobe, as soon as I took that photo I attached an extra snap to each side of the collar armor to make it sit flatter. Looks much better
I think I will drop the thighs down a tad.
Thanks for the critique everyone. I will post photos again after I receive my BH status.
TLobe, as soon as I took that photo I attached an extra snap to each side of the collar armor to make it sit flatter. Looks much better
I think I will drop the thighs down a tad.
Thanks for the critique everyone. I will post photos again after I receive my BH status.
Last edited by a moderator:
Even without adjusting the minor suggestions above, I don't foresee you having a problem at all getting a BH designation in the 501st... as for the helmet size you mentioned above, I believe the helmet should sit between the clavical/trapezious muscle area when wearing without armor, so the width looks pretty good, but yeah it does sit a tad high on your neck. Cruzer's BKBT is a bit bigger, so sometime down the road you could try upgrading to one of those (you can always sell whichever you don't end up using 
)
)
Last edited by a moderator:
Balancesheet
Active Hunter
I don't really know why it sits high on me. I purchased the helmet off of a guy on ebay without knowing who Asok, Saint Nasty, or the dented helmet was. The helmet is slightly warped on the left side, but I don't know if that effects how it should sit.
I did pick up that BKBT CC lid that Cruzer was selling not too long ago. We'll see what works
I did pick up that BKBT CC lid that Cruzer was selling not too long ago. We'll see what works
Last edited by a moderator:
Balancesheet
Active Hunter
Thanks everyone! I got my 501st approval/acceptance today. I tip my helmet to all of your amazing advice.
Last edited by a moderator:
OBrotherRacing
Hunter
CONGRATULATIONS!!! It seems like this was a pretty quick build and acceptance for you. Great job!!!
Last edited by a moderator:
