Reply to thread

Message

For months, I'd been tinkering around with the idea of having a removeable right earpiece, with the benefit of being able to store the helmet and RF stalk separately. Velcro was an option, but I wanted something that looked a little sturdier. By the way, I'm working with a Mystery Helmet...

As I put away a 6-outlet power strip last night after a gig, I noticed the small holes on the bottom, put there in order to mount the strip onto screws.

Later, a la Doc Brown, I fell off the toilet and hit my head; when I came to, I came up with this:

Has anyone tried this? Obviously, I'd have to use small machine screws, and I'll have to be real careful not to crack the resin.

I'll update on the progress, but I'm going to try for this idea unless someone can shoot it down...

<blockquote data-quote="batninja" data-source="post: 22746" data-attributes="member: 229">For months, I&#039;d been tinkering around with the idea of having a removeable right earpiece, with the benefit of being able to store the helmet and RF stalk separately.&nbsp; Velcro was an option, but I wanted something that looked a little sturdier.&nbsp; By the way, I&#039;m working with a Mystery Helmet...As I put away a 6-outlet power strip last night after a gig, I noticed the small holes on the bottom, put there in order to mount the strip onto screws.Later, a la Doc Brown, I fell off the toilet and hit my head; when I came to, I came up with this:<img src="http://200.72.163.179/cdref/tdh/Helmet/earidea.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />Has anyone tried this?&nbsp; Obviously, I&#039;d have to use small machine screws, and I&#039;ll have to be real careful not to crack the resin.I&#039;ll update on the progress, but I&#039;m going to try for this idea unless someone can shoot it down...</blockquote>

[QUOTE="batninja, post: 22746, member: 229"] For months, I'd been tinkering around with the idea of having a removeable right earpiece, with the benefit of being able to store the helmet and RF stalk separately. Velcro was an option, but I wanted something that looked a little sturdier. By the way, I'm working with a Mystery Helmet... As I put away a 6-outlet power strip last night after a gig, I noticed the small holes on the bottom, put there in order to mount the strip onto screws. Later, a la Doc Brown, I fell off the toilet and hit my head; when I came to, I came up with this: [img]http://200.72.163.179/cdref/tdh/Helmet/earidea.jpg[/img] Has anyone tried this? Obviously, I'd have to use small machine screws, and I'll have to be real careful not to crack the resin. I'll update on the progress, but I'm going to try for this idea unless someone can shoot it down... [/QUOTE]

This thread is more than 21 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification