Reply to thread

Do not use paint stripper, it will eat the resin, and melt it. You want to rub it down with acetone and sand it with 800-1000 grit sandpaper, wetsanding it in acetone.


OR


Lightly ravorblade it off coat by coat in soapy water with a flat blade then sandpaper the rough spots, this removes layers of paint easily.


This thread is more than 20 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top