Reply to thread

ROTJ Blaster


Here is my BlasTech EE-3 SOTE/ROTJ version



I started of with a Resin cast of a real Webley WW I Flair gun, the stock mount was made out of aluminum and the stock it self was made out of wood.

Once I got that by mail, I added a bunzen burner muzzle to it wich gave a super effect when looking in to the barrel.

I then gave the Blaster a Black primer coat next came the gun black paint.

I weathered it with Humbrol model paint a mix of aluminum, silver and gun metal, the stock was weathered with some earth tones

I finished it with a coat of matt varnish and poliched it just a bit to give it that parkerised look real old guns have.

I gave the inside barrel a coat of Hi Gloss varnish to make shure the copper bunzen burner muzzle dosn't go green on me


This thread is more than 16 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top