Reply to thread

Message

fett-uk heres a link to my scout costume
[link}http://pub24.ezboard.com/ftheukproppartyfrm7.showMessage?topicID=11.topic{/link]

I did the heating up and remoulding but over the week the DP helmet gone back to orignal shape gggggggggggggggrrrrrrrrr..... so ill have to reinforce it.

**UPDATE**
heres an updated pic after i put the red on the helmet, I now its a bit bright but it will be darken down when i get some or spray paints, inks and more GW paints also

I used electrical tape on the helmet to do the chipped paint effect, i found if you pulled it tight when applying to the helmet then used a pen to draw on the areas where i wanted to leave on
Then i cut around the areas i marked on in pen, the tape broke away from these areas after cutting making it easy to pull the tape off and leaving the taped areas on.

cheers

neil
uk-scout
www.uk-scout.co.uk
ukbikerscout@hotmail.com

<blockquote data-quote="ukscout" data-source="post: 9984" data-attributes="member: 160">fett-uk heres a link to my scout costume [link}http://pub24.ezboard.com/ftheukproppartyfrm7.showMessage?topicID=11.topic{/link]I did the heating up and remoulding but over the week the DP helmet gone back to orignal shape gggggggggggggggrrrrrrrrr..... so ill have to reinforce it.**UPDATE**heres an updated pic after i put the red on the helmet, I now its a bit bright but it will be darken down when i get some or spray paints, inks and more GW paints also<img src="http://www.uk-scout.co.uk/Boba Helmet/bfred.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />I used electrical tape on the helmet to do the chipped paint effect, i found if you pulled it tight when applying to the helmet then used a pen to draw on the areas where i wanted to leave on Then i cut around the areas i marked on in pen, the tape broke away from these areas after cutting making it easy to pull the tape off and leaving the taped areas on.cheersneiluk-scout<a href="http://www.uk-scout.co.uk" target="_blank">www.uk-scout.co.uk</a><a href="mailto:ukbikerscout@hotmail.com">ukbikerscout@hotmail.com</a><img src="http://www.uk-scout.co.uk/ukscout-webbanner.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" /></blockquote>

[QUOTE="ukscout, post: 9984, member: 160"] fett-uk heres a link to my scout costume [link}http://pub24.ezboard.com/ftheukproppartyfrm7.showMessage?topicID=11.topic{/link] I did the heating up and remoulding but over the week the DP helmet gone back to orignal shape gggggggggggggggrrrrrrrrr..... so ill have to reinforce it. **UPDATE** heres an updated pic after i put the red on the helmet, I now its a bit bright but it will be darken down when i get some or spray paints, inks and more GW paints also [img]http://www.uk-scout.co.uk/Boba Helmet/bfred.jpg[/img] I used electrical tape on the helmet to do the chipped paint effect, i found if you pulled it tight when applying to the helmet then used a pen to draw on the areas where i wanted to leave on Then i cut around the areas i marked on in pen, the tape broke away from these areas after cutting making it easy to pull the tape off and leaving the taped areas on. cheers neil uk-scout [url="http://www.uk-scout.co.uk"]www.uk-scout.co.uk[/url] [email="ukbikerscout@hotmail.com"]ukbikerscout@hotmail.com[/email] [img]http://www.uk-scout.co.uk/ukscout-webbanner.jpg[/img] [/QUOTE]

This thread is more than 22 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification