Reply to thread

Message

I finally got around to doing some more work on this project including the Rocket.

3 versions of the rocket to get it looking fairly respectable, though I think it's still a bit on the small side (which is odd considering I'm still using WoF's templates from the same file as the rest of the pack's templates).

The entire rocket assembly was made using WoF's templates as mentioned, Cardboard (the kind you find on the back of pads of paper) and contact cement. Simple print, cut, trace onto the cardboard, cut again and glue together.

Next up is the thrusters, some more bondo, sand, bondo, sand. Primer, paint .. and a harness. Then I can really get to work on the rest of the costume.

[ATTACH=full]7470[/ATTACH]

[ATTACH=full]7471[/ATTACH]

<blockquote data-quote="rorschach9" data-source="post: 110637" data-attributes="member: 1547">I finally got around to doing some more work on this project including the Rocket.&nbsp;3 versions of the rocket to get it looking fairly respectable, though I think it&#039;s still a bit on the small side (which is odd considering I&#039;m still using WoF&#039;s templates from the same file as the rest of the pack&#039;s templates).&nbsp;The entire rocket assembly was made using WoF&#039;s templates as mentioned, Cardboard (the kind you find on the back of pads of paper) and contact cement.&nbsp; Simple print, cut, trace onto the cardboard, cut again and glue together.&nbsp;Next up is the thrusters, some more bondo, sand, bondo, sand.&nbsp; Primer, paint .. and a harness.&nbsp; Then I can really get to work on the rest of the costume.&nbsp; <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />[ATTACH=full]7470[/ATTACH][ATTACH=full]7471[/ATTACH]</blockquote>

[QUOTE="rorschach9, post: 110637, member: 1547"] I finally got around to doing some more work on this project including the Rocket. 3 versions of the rocket to get it looking fairly respectable, though I think it's still a bit on the small side (which is odd considering I'm still using WoF's templates from the same file as the rest of the pack's templates). The entire rocket assembly was made using WoF's templates as mentioned, Cardboard (the kind you find on the back of pads of paper) and contact cement. Simple print, cut, trace onto the cardboard, cut again and glue together. Next up is the thrusters, some more bondo, sand, bondo, sand. Primer, paint .. and a harness. Then I can really get to work on the rest of the costume. :) [ATTACH=full]7470[/ATTACH] [ATTACH=full]7471[/ATTACH] [/QUOTE]

This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification