Reply to thread

Did some work on the left gauntlet. It was time to fix the hoses for the flamethrower. I had some old white cable laying around. Cut in 3 pieces and coloured one red. As base 3 washers were used. Drilled the holes to the flamethrower backside. Put in the cable and fixed the 3 ends of the cable in the inside of the gauntlet with some gaffer tape. I will do some weathering, so the red hose won´t look that ugly painted anymore. :D It´s not perfect, but it will do it´s job.

[ATTACH]47525[/ATTACH][ATTACH]47526[/ATTACH][ATTACH]47527[/ATTACH][ATTACH]47528[/ATTACH]


This thread is more than 2 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top