Reply to thread

Message

[USER=13129]Irongladiator[/USER] I was able to get a stubby Philips screwdriver in there before I moved the plate back and glued it into position, but I also have a offset screw driver that will fit in if I ever need to tighten. Essentially like an allen wrench but with a philips head.

I must have saved it from a "Some assembly required"/ Ikea style furniture set, as it's the type that usually comes with those.

[URL unfurl="true"]https://www.homedepot.com/p/Husky-Offset-Screwdriver-Set-2-Piece-20210017/309177886[/URL]

[QUOTE="lowberg, post: 535471, member: 7725"] [USER=13129]Irongladiator[/USER] I was able to get a stubby Philips screwdriver in there before I moved the plate back and glued it into position, but I also have a offset screw driver that will fit in if I ever need to tighten. Essentially like an allen wrench but with a philips head. I must have saved it from a "Some assembly required"/ Ikea style furniture set, as it's the type that usually comes with those. [URL unfurl="true"]https://www.homedepot.com/p/Husky-Offset-Screwdriver-Set-2-Piece-20210017/309177886[/URL] [/QUOTE]

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification