Reply to thread

Message

Thanks for the kind words guys, I'm just about finished everything now except the vest and some off the minor details, so not far to go now!
Heres a larger pic of inside the helmet so you can better see the Hyperdyne set up. The RF lights are joined up to the main unit with wire running up the hollow RF stalk. When the servo/stalk moves down, the lights start flashing. I need to get a stronger servo though as sometimes it has trouble bringing it back up. The RF is one of BM's solid and ready finished ones. I just ordered it without the LED's installed and drilled through the holes to allow my LED's to fit in and have the wires pass through to the stalk! Hope that helps

[ATTACH]7562[/ATTACH]

<blockquote data-quote="KidAkira" data-source="post: 112624" data-attributes="member: 1165">Thanks for the kind words guys, I&#039;m just about finished everything now except the vest and some off the minor details, so not far to go now!Heres a larger pic of inside the helmet so you can better see the Hyperdyne set up. The RF lights are joined up to the main unit with wire running up the hollow RF stalk. When the servo/stalk moves down, the lights start flashing. I need to get a stronger servo though as sometimes it has trouble bringing it back up. The RF is one of BM&#039;s solid and ready finished ones. I just ordered it without the LED&#039;s installed and drilled through the holes to allow my LED&#039;s to fit in and have the wires pass through to the stalk! Hope that helps<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /> [ATTACH]7562[/ATTACH]</blockquote>

[QUOTE="KidAkira, post: 112624, member: 1165"] Thanks for the kind words guys, I'm just about finished everything now except the vest and some off the minor details, so not far to go now! Heres a larger pic of inside the helmet so you can better see the Hyperdyne set up. The RF lights are joined up to the main unit with wire running up the hollow RF stalk. When the servo/stalk moves down, the lights start flashing. I need to get a stronger servo though as sometimes it has trouble bringing it back up. The RF is one of BM's solid and ready finished ones. I just ordered it without the LED's installed and drilled through the holes to allow my LED's to fit in and have the wires pass through to the stalk! Hope that helps:) [ATTACH]7562.vB[/ATTACH] [/QUOTE]

This thread is more than 9 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification