Just to get sure I'am working

[Jaro Krieg]

So, I finally open my WIP Thread...

even if I am realy early in Progress and slowed down a bit.
But atleast I can present my concept and may get some Ideas and improvements.


For the Heart of the Armor (Chestplates) I asked a Friend of mine whose working in a trafficsign production.
Anhe were able to cut the Plates out of 2mm thick Aluminium

but the industrial bending wont work so I guess i have to hammer it until it fits.


My Pal informed me that they are a little bit downsizing in his Company, got a lot sparetime and enough of 3mm thick Plates in the Junkjard... so I am going to add a mm. XD


i got no special theme rightnow...
Ok I could say that i have a theme because the Softparts will all come from leftovers of the fed. german Army
like the Flightsuit, Flakvest ( a got example is this

But to defend myself. i've gottet the Idea without knowing from this.)
I tried the sizes with Cartonage to my Vest for instance

But i guess the "spaciest" thing would be the Ammopuches.

There are Tons of these square and hard PVC mag pouches remain untouched... Well this is what happens if you decide to bring out new ammopuches and reform the whole Army 2 years later from Olive to Camounflage


Oh jeah.
Maybe i should give a prewiev on the Collors

I like the Black - blue (justice - Duty) combo. (besides my ancestors were Executors for over 10 generations)


At the Moment I am still collecting all needed parts and stuff When I got free Time to do.
but I guess i should have a good looking Beskar in 2-3 Months.

 

[Jaro Krieg]

A little update

The Metalparts get together one piece at the time XD

 

[VariablePenguin]

OOOO Shiny. Very cool looking so far.

 

[Jaro Krieg]

Oh just the recent update

 

[Jaro Krieg]

Yup getting further

 

[Hettyc Aden]

this armour is looking fantastic! cant wait to see it finished

 

[Tomoe]

The leathre or padded vest fabric should make the edged plates really comfortable to wear and the arrangement turned out well now. You mentioed that the stomach-plate was abit wide and might add a pinching-danger? filing down half a centimeter on each side might help that and even out the spacings. Otherwise I like big plates as long as you can still move in them. I guess the upper-arm plates are fixed temporarely? Right now that look like they'll probably slip down or pinch if you pull that ribbon tight. A connection up to the shoulder seam of the vest, underneath the shoulder-bell plate could fix that.

 

[Jaro Krieg]

well, the upeprarms are just with a fexible strech attached right now. and only knotted XD
strangely it holds wenn i pull it over the bicep muscle.

A Piece of Velcro on the suit or just a simple black safety-pin should keep the position. Atleast they cant fell off due the gaunts.

 

[teke]

wow what a great start. i'll be watching this one.

 

[Saz]

well, the upeprarms are just with a fexible strech attached right now. and only knotted XD
strangely it holds wenn i pull it over the bicep muscle.

A Piece of Velcro on the suit or just a simple black safety-pin should keep the position. Atleast they cant fell off due the gaunts.

I think what Tomoe is trying to get at is that, yes they stay on right now but,if you do anything more than just stand around, they are going to work their way down.

Velcro is probably the best bet as a safe guard, but make sure it is industrial velcro and ensure it it sewn onto the flightsuit.

 

[Jaro Krieg]

its not fully complete but **** near to it

 

[Hettyc Aden]

wow, this set looks great!! fantastic job there vod!

 

[mandosoldier]

LOL I recognize that scheme...

j/k, your looks a lot better than mine. In fact I'll soon be selling my clone armor/clone helmet, custom parts in an attempt to finish replacing the SFP parts I have since I soon will be out of the army and won't have the time nor money to work on many projects at once.

 

[Jaro Krieg]

IZ DONE DONE DONE!

 

[Apollo]

weathering on real metal always looks so good. Nice costume you've got there

 

[Jaro Krieg]

Just found this Thread accidently via Google and thought....

lets Update XD

The whole Evolution of two Years.
Mandalorianische Beskarschmiede Forum - Harnischhaus - Full Metal Jaro

Did some little Changes, adjustments and replacements but a bit too much. XD

 

[Jaro Krieg]

Maybe its time to post some updates.



Properbly the famous picture of my gear.


After some major Upgrades this Spring:


New Gloves, Gaunts and Leg-Armor. The Theme of the Con i Attended was Assasins Creed - So i had the funny idea to adapt some style wit a new hooded cape XD (It was a rainy day outside - so that was actually a good idea afterwards)





Some Details...

New Right Gauntlet with a LegacyStyle flametrhower (and build in Lighter) + a custom Railgun


New Left-Gauntlet with a Bo-KatanStyle topbox (with working LEDs for the Twinblaster), a custom Rocketlauncher and a detachable Wristblade. (I can swap the 3mm Aluminum blade with a 3mm Acryldummy - i also try to make an illuminated acryl "vibro"blade )


Armored Gloves - made out of 1mm Aluminum.