Reply to thread

Also get yourself some files, a large hardware/wood file & some small jewlers files. An assortment of sandpaper grits is recommended. Also be sure to use automotive spot putty especially OVER the bondo. Bondo tends to leave small pinholes. The most important thing..TAKE IT SLOW!!! Don't get too carried away with the filing & the grinding!

Good luck.

Art


This thread is more than 22 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top