Reply to thread

Hi guys...its been a while, but I finally am getting some time to work on my ESB Fett.  Most important is that I've finally got the ball rolling on having my jumpsuit made. 

 

That being said, there is a detail on the suit that I am hoping those "in the know" can answer.  What is the correct configuration for the fake fabric "belt" on the jumpsuit....the detail on the jumpsuit mid-torso?  I've been scouring over the reference pics and the only pics I can find that even show this detail are of the Prepro suit, mainly because the model was so tall.  It basically has a double stitch with a slight V taper.  The Marmit Fett figure jumpsuit also has this style as well.

 

Seems that most of the jumpsuit vendors make them with a wide "belt", some with three rows of stitching. I was just wondering, for the ESB, which is more accurate.  I'm inclined to say the small double stitch with V taper, but if someone has a good pic that would know for sure, I'd love to get this detail right.  A PM would be fine! :)

 

Thanks! Rob


This thread is more than 19 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top