Reply to thread

Okay, here's what I believe the measurements to be, backed up by the life size standee (measurements reduced by 5% because the standee is oversized) and based upon the size of the girth belt.  Each braid in the girth belt is 1/4" round and there are 19 braids, making a total width of 4.75."  Factor in the "spacing" between the braids and the overall width is probably about 5."  The pouches cover all but 5 braids, which would be 1.25".  So 5" - 1.25" = 3.75" tall pouches.  They are 2" wide.  Now the belt that they hang on is closer to 2" or maybe 2.25" wide.  That belt covers all but 11 braids, which means 5" - 2.75" = at most 2.25".   I also messed around in photoshop a lot scaling everything to the size of the blasters and knowing the size of each braid.


This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top