Reply to thread

Message

As I get myself ready to receive my Boba Maker Jet Pack I've been focused on the greeblies. This weekend I found myself wanting to get my hands on some tiny vintage crews for the BNC Connector. You gotta love small town hardware stores (e.g. True Value, Ace Hardware and small Mom-n-Pop shops). I had some decent luck.....
[ATTACH=full]212236[/ATTACH]

I mounted the BNC Connector to a piece of scrap cardboard and took pictures at different angle to showcase the screws a bit. I don't think they look to bad eh? In case you were wondering what hardware I used, I used these.....[ATTACH=full]212237[/ATTACH]
I also used small fender washers and lock washers that I already had on hand.

-Iron

<blockquote data-quote="Irongladiator" data-source="post: 513640" data-attributes="member: 13129">As I get myself ready to receive my Boba Maker Jet Pack I&#039;ve been focused on the greeblies. This weekend I found myself wanting to get my hands on some tiny vintage crews for the BNC Connector. You gotta love small town hardware stores (e.g. True Value, Ace Hardware and small Mom-n-Pop shops). I had some decent luck.....[ATTACH=full]212236[/ATTACH]I mounted the BNC Connector to a piece of scrap cardboard and took pictures at different angle to showcase the screws a bit. I don&#039;t think they look to bad eh? In case you were wondering what hardware I used, I used these.....[ATTACH=full]212237[/ATTACH]I also used small fender washers and lock washers that I already had on hand.<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt="(y)" title="Thumbs Up&nbsp; &nbsp; (y)"&nbsp; data-smilie="18"data-shortname="(y)" />-Iron</blockquote>

[QUOTE="Irongladiator, post: 513640, member: 13129"] As I get myself ready to receive my Boba Maker Jet Pack I've been focused on the greeblies. This weekend I found myself wanting to get my hands on some tiny vintage crews for the BNC Connector. You gotta love small town hardware stores ([I]e.g. True Value, Ace Hardware and small Mom-n-Pop shops[/I]). I had some decent luck..... [ATTACH type="full" alt="BNC Connector with hardware.jpg"]212236[/ATTACH] I mounted the BNC Connector to a piece of scrap cardboard and took pictures at different angle to showcase the screws a bit. I don't think they look to bad eh? In case you were wondering what hardware I used, I used these.....[ATTACH type="full" alt="True Value BNC Hardware.jpg"]212237[/ATTACH] I also used small fender washers and lock washers that I already had on hand. (y) -Iron [/QUOTE]

This thread is more than 1 year old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification