Reply to thread

Message

[USER=14255]Lazerjock[/USER]
This one's for you! It is hard to tell from these pics but the coating process with the XTC-3D solution went on great. It dries on Clear and glossy. So you can still see the Print Lines, but feel them.....you cannot.
[ATTACH=full]197909[/ATTACH]
[ATTACH=full]197910[/ATTACH]
[ATTACH=full]197911[/ATTACH]
[ATTACH=full]197912[/ATTACH]

I inspected it all it it came out great! There were a few bumps were the XTC-3D stuff kinda ppoled in an area and then dried. but it came off pretty quick with some 220 grit sand paper. I took 30 mins and sanded it all down. It was baby smooth at this point.
[ATTACH=full]197913[/ATTACH]
[ATTACH=full]197914[/ATTACH]

I'm just gonna give it a wipe down in the morning with a wet wipe and let it dry in the sun (Should be in the 90's here tomorrow) then once dry, hit it with some Primer and then really look it over for them pesky lines. I suspect if I see any lines or imperfections whatsoever they'll be tiny and in places and hopefully be hidden by painting. But we shouldn't see any lines in the major areas. Overall I'm quite satisfied with the product and have no issues recommending it to others. More pics to follow!

-Iron

<blockquote data-quote="Irongladiator" data-source="post: 502478" data-attributes="member: 13129">[USER=14255]Lazerjock[/USER] This one&#039;s for you! It is hard to tell from these pics but the coating process with the XTC-3D solution went on great. It dries on Clear and glossy. So you can still see the Print Lines, but feel them.....you cannot. <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt="(y)" title="Thumbs Up&nbsp; &nbsp; (y)"&nbsp; data-smilie="18"data-shortname="(y)" />[ATTACH=full]197909[/ATTACH][ATTACH=full]197910[/ATTACH][ATTACH=full]197911[/ATTACH][ATTACH=full]197912[/ATTACH]I inspected it all it it came out great! There were a few bumps were the XTC-3D stuff kinda ppoled in an area and then dried. but it came off pretty quick with some 220 grit sand paper. I took 30 mins and sanded it all down. It was baby smooth at this point. [ATTACH=full]197913[/ATTACH][ATTACH=full]197914[/ATTACH]I&#039;m just gonna give it a wipe down in the morning with a wet wipe and let it dry in the sun (Should be in the 90&#039;s here tomorrow) then once dry, hit it with some Primer and then really look it over for them pesky lines. I suspect if I see any lines or imperfections whatsoever they&#039;ll be tiny and in places and hopefully be hidden by painting. But we shouldn&#039;t see any lines in the major areas. Overall I&#039;m quite satisfied with the product and have no issues recommending it to others.<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt="(y)" title="Thumbs Up&nbsp; &nbsp; (y)"&nbsp; data-smilie="18"data-shortname="(y)" /> More pics to follow!-Iron</blockquote>

[QUOTE="Irongladiator, post: 502478, member: 13129"] [USER=14255]Lazerjock[/USER] This one's for you! It is hard to tell from these pics but the coating process with the XTC-3D solution went on great. It dries on Clear and glossy. So you can still see the Print Lines, but feel them.....you cannot. (y) [ATTACH type="full"]197909[/ATTACH] [ATTACH type="full"]197910[/ATTACH] [ATTACH type="full"]197911[/ATTACH] [ATTACH type="full"]197912[/ATTACH] I inspected it all it it came out great! There were a few bumps were the XTC-3D stuff kinda ppoled in an area and then dried. but it came off pretty quick with some 220 grit sand paper. I took 30 mins and sanded it all down. It was baby smooth at this point. [ATTACH type="full"]197913[/ATTACH] [ATTACH type="full"]197914[/ATTACH] I'm just gonna give it a wipe down in the morning with a wet wipe and let it dry in the sun ([I]Should be in the 90's here tomorrow[/I]) then once dry, hit it with some Primer and then really look it over for them pesky lines. I suspect if I see any lines or imperfections whatsoever they'll be tiny and in places and hopefully be hidden by painting. But we shouldn't see any lines in the major areas. Overall I'm quite satisfied with the product and have no issues recommending it to others.(y) More pics to follow! -Iron [/QUOTE]

This thread is more than 1 year old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification