So again, the inspiration was [USER=14255]Lazerjock[/USER] 's Jawa! Both of us, at the same time, found ourselves building the ROTJ Boba and bounced ideas off one another and even shared items on Fett related things with one another. After admiring his Jawa he sent me the blaster to get me kicked off!

(Picture Credit to [USER=14255]Lazerjock[/USER] )
[ATTACH=full]213681[/ATTACH]
Which was made from these parts and all held together with Hot Glue.....
(Picture Credit to [USER=14255]Lazerjock[/USER] )
[ATTACH=full]214568[/ATTACH]
I gave Lazerjock a hard time for priming the stock.
As I wanted to stain it so it looked like the 501st Ion Rifle, which looks like this.....
[ATTACH=full]213683[/ATTACH]
It wasn't too hard to sand it off and before I knew it, I had a clean slate again! 
[ATTACH=full]213684[/ATTACH]
Then I proceeded to stain it. (Used Home Depot's Varathane Provincial & Varathane Sealer)
[ATTACH=full]213685[/ATTACH]
You may have noticed but the barrel also came unglued, so I had to find a creative way to get it back on there and if you know me I like to improve on designs and took it upon myself to strengthen & reinforce it! Since I was using 2" PVC for my Jawa Mannequin, and seeing as how Lazerjock used 2" PVC pieces to create the Ion Rifle, I was able to cut off a small piece and sand a little of it off so the barrel could be reattached! Using super glue, it'll probably be awhile before this comes unglued again.
Also, my little Ryobi Sander is just great! It makes such short work of things.
[ATTACH=full]213686[/ATTACH]
I'm not too worried about the PVC Peeking from inside the barrel, because much like how Lazerjock had that little blue lightning effect. I got the same thing, which hides that PVC Piece! 
[ATTACH=full]213687[/ATTACH]
More to come!
-Iron