Reply to thread

Message

Quick update on the base layer.

I used a polyester/spandex suiting blend in more of a green color. I intend to do some dying/airbrushing towards the end of the project to bring the vivid tone down a little bit more.

[ATTACH=full]186009[/ATTACH]
Started with McCall's M2054 as a base, with a lot of modifications. At 5'4", average build, the small was still considerably baggy, If anyone decides to give this pattern a go, I recommend mocking this pattern to dial it in.

Again, addressing the lack reference material for the armorer, I'm going to try my best with the details, as how they can be interpreted from grainy/dark screen grabs.
[ATTACH=full]186010[/ATTACH]
Like, what on earth is going on with her pant legs?

[ATTACH=full]186011[/ATTACH]
I believe there's some kind of spacer on the outside seam of the pant leg? Beats me. Blame it on the v1 iteration.

[ATTACH=full]186012[/ATTACH]
Flightsuit v1

[ATTACH=full]186013[/ATTACH]
Pant... leg... opening detail? Haha.

[ATTACH=full]186014[/ATTACH]
I also replaced the inside double sleeve with wicking performance wear fabric for a little airflow.

<blockquote data-quote="Hydra" data-source="post: 490826" data-attributes="member: 1240">Quick update on the base layer.I used a polyester/spandex suiting blend in more of a green color. I intend to do some dying/airbrushing towards the end of the project to bring the vivid tone down a little bit more. [ATTACH=full]186009[/ATTACH]Started with McCall&#039;s M2054 as a base, with a lot of modifications. At 5&#039;4&quot;, average build, the small was still considerably baggy, If anyone decides to give this pattern a go, I&nbsp; recommend mocking this pattern to dial it in.Again, addressing the lack reference material for the armorer, I&#039;m going to try my best with the details, as how they can be interpreted from grainy/dark screen grabs.[ATTACH=full]186010[/ATTACH]Like, what on earth is going on with her pant legs?[ATTACH=full]186011[/ATTACH]I believe there&#039;s some kind of spacer on the outside seam of the pant leg? Beats me. Blame it on the v1 iteration. [ATTACH=full]186012[/ATTACH]Flightsuit v1[ATTACH=full]186013[/ATTACH]Pant... leg... opening detail? Haha.[ATTACH=full]186014[/ATTACH]I also replaced the inside double sleeve with wicking performance wear fabric for a little airflow.</blockquote>

[QUOTE="Hydra, post: 490826, member: 1240"] Quick update on the base layer. I used a polyester/spandex suiting blend in more of a green color. I intend to do some dying/airbrushing towards the end of the project to bring the vivid tone down a little bit more. [ATTACH=full]186009[/ATTACH] Started with McCall's M2054 as a base, with a lot of modifications. At 5'4", average build, the small was still considerably baggy, If anyone decides to give this pattern a go, I recommend mocking this pattern to dial it in. Again, addressing the lack reference material for the armorer, I'm going to try my best with the details, as how they can be interpreted from grainy/dark screen grabs. [ATTACH=full]186010[/ATTACH] Like, what on earth is going on with her pant legs? [ATTACH=full]186011[/ATTACH] I believe there's some kind of spacer on the outside seam of the pant leg? Beats me. Blame it on the v1 iteration. [ATTACH=full]186012[/ATTACH] Flightsuit v1 [ATTACH=full]186013[/ATTACH] Pant... leg... opening detail? Haha. [ATTACH=full]186014[/ATTACH] I also replaced the inside double sleeve with wicking performance wear fabric for a little airflow. [/QUOTE]

This thread is more than 3 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification