Reply to thread

I also have a pair of highly modified RA gauntlets & I used spray contact cement to adhere a thin piece of foam to the lower half of the gauntlet shells.  No problem with slippage at all!

[ATTACH=full]78332[/ATTACH]

[ATTACH=full]78333[/ATTACH]


This thread is more than 22 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top