Reply to thread

Quick question: How do you connect the entire hose connector unit to the individual gauntlet pieces (mine are resin)? Drill into them, and then glue in the dowel?


Also, for some reason, neither Lowes nor Home Depot carried the A-161 Watts 3/8" Fine Thread Flare Nut...A-161(green) was depicted on the graphic underneath the racks, but there was no A-161 placeholder on the rack between A-160 and A-162. Guess I'll have to take a drive. :rolleyes


This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top