Reply to thread

Message

After priming it with grey primer, I gave it a full coat of LustreKote Aluminum (by Top Flite) which is made mainly for model aircraft. I then sealed it with LustreKote Flat Clear. Here is the result:

[ATTACH=full]78946[/ATTACH]

The rest of the paints are Testors acrylics (Lee's colors, with the exception of the green earpiece which I custom mixed, and the earpiece red).

For masking damage, I used a no-name brand of liquid mask. Light blue latex stuff which dries clear.

[QUOTE="Son of Fett, post: 35804, member: 506"] After priming it with grey primer, I gave it a full coat of LustreKote Aluminum (by Top Flite) which is made mainly for model aircraft. I then sealed it with LustreKote Flat Clear. Here is the result: [ATTACH=full]78946[/ATTACH] The rest of the paints are Testors acrylics (Lee's colors, with the exception of the green earpiece which I custom mixed, and the earpiece red). For masking damage, I used a no-name brand of liquid mask. Light blue latex stuff which dries clear. [/QUOTE]

This thread is more than 20 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification